Part Number: LP5814 Tool/software: Can output channels of this LED driver be ganged together to drive higher current? Would it be possible to use the 4 output device (R/G/B/W) to drive just 3 LEDs (R/G/B), if our requirements are 90/50/40 mA per LED channel…
Part Number: LP5814 After several days of head-scratching, I finally diagosed what I believe is poorly-documented confict on my I2C bus.
I have MAX11612 ADC that uses 0x34. The LP5814DLR is listed in datasheet as using 0x2c, so that is fine. But there…
Part Number: LP5814 Tool/software: Hello,
Good Day !
We are currently working with one of our manufacturing plant to collect below information.
Site: Zhuhai.
Please provide us the reflow data for the below MPN’s.
Note : Placement /Applied…
Part Number: LP5814 Other Parts Discussed in Thread: TLC59116
Tool/software:
Hello,
I am looking for a LED driver for camera lighting. The control interface must be I2C. Unfortunately, there are hardly any LED drivers with I2C control with the required…
Part Number: LP5817 Other Parts Discussed in Thread: LP5814 Hi team,
Regarding the LP5817 datasheet, the highlighted section in the image is actually for the LP5814, correct?
Best regards,
Kyohei
Part Number: LP5817 Other Parts Discussed in Thread: LP5814 , LP5815 The Device Comparison table in the LP5817 datasheet needs fixed. This caused a design issue and we had to rework x14 boards to switch parts from LP5817 to LP5815 because this table has…
Part Number: LP5036 Other Parts Discussed in Thread: LP5814 Dear All,
We are planning to use LP5036 LED driver IC to drive LRTB R48G leds. The anode of the leds are supplied from a 3.7V LiPo battery. The datasheet of the leds mention the max forward…
Part Number: LP5562 Other Parts Discussed in Thread: LP5814 Tool/software: We are considering the LP5562 as driver for the RGB signal LED on an IoT sensor. More than 99% of the time this chip is in software Standby mode (we cannot use the EN pin). The…
Hi Parv,
Sorry, I misinterpreted the part number.
Do you have the I2C pull-up resistors on the PCB? Can you please check the hardware configuration so we can rule out hardware issues?
[FAQ] LP5814: How to solve NACK when send I2C command to LP5814…
Hi Brian,
TI don't have any p2p replacement for IS31FL3094. Could you share us the customer's name and how many LEDs they need to drive? We have an alternative LP5814 with comparable performance and competitive cost. we can move to internal email to…
