Part Number: LSF0101 Other Parts Discussed in Thread: LSF-EVM Output voltage of pin B1 and B2 are not changing to 3.3V. Default gets assigned to LSF0101_IO_5S but the voltages in Hyperlynx simulation is observed as 1.8V. When tried to edit model, it is…
Part Number: LSF0101 Which model do i need to choose on my level shifter ibis file? I only see one terminal on my ibis file in ADS.
Would also appreciate help in simulating using the spice model.
Part Number: LSF0101 Tool/software: Hi
We need 3.3V to (0.8V-5.0V) up and down translation for 100 MHz clock signal.
We have checked the part LSF0101 for this application with single supply configuration, but it is supporting only 3.3V to (1.8V-5V…
Part Number: LSF0101 Tool/software: Hi TI Team,
We are planning to use the LSF0101 for translating Intel's PECI interface , which operates at 1V , to 3.3V to interface with an FPGA that operates at 3.3V .
For your reference, we’ve attached the block…
Part Number: LSF0101 Other Parts Discussed in Thread: 2N7001T Dear Team,
we are looking for a level translator for 40MHz clk signal.
unidirectional , we need to level shift from 3.3V to 1.8V.
Please cna you advide a level translator or clock…
Part Number: LSF0101 Other Parts Discussed in Thread: SN74AUC1G125 Tool/software: Hi Support
There is a clock source (1.8V level, 100MHz from ASTMHTE-18-100.000MHz-AR-E-T), how to design with LSF level shift to get a 1.2V level 100MHz clock and fed…
Part Number: LSF0101 Dear TI,
We are planning to use your level shifter(1.8V to 3.3V) on MDC and MDIO line to support RMII 100Mbps. Could you recommend the suitable level shifter?
Thank you.
Regards,
Jaden
Part Number: LSF0101 Tool/software: Hello dear support,
I am reading through the datasheet for LSF0101 and on page 14, Figure 9.3, In my opinion the shown capacitor of 0.1mF is incorrect and it should be 0.1uF/100nF.
Can you please advise if this…
Part Number: SN74LXC2T45 Other Parts Discussed in Thread: LSF0101 Tool/software: We are currently working with the SN74LXC2T45 dual-bit level shifter in our design and needed to simulate its behavior. Since an official SPICE model does not appear to be…
Part Number: LSF0101 There is a circuit that a LSF-type voltage-level translation connects with a TXB-type voltage-level translation, and the output is abnormal, what could be the possible reasons?
