Other Parts Discussed in Thread: CC430F5137 , TMP100 Dear all,
Trying from 2 days figure out what is wrong with the code since the result is always wrong. I use cc430F5137 and TMP100 connected to Port 1.2 (clock) Port 1.3 (Data) 4,7K pull up is connected…
Part Number: LM48100Q-Q1 Tool/software: I am using the Mikroe A udioamp Click board which uses the LM48100Q-Q1...
https://www.mikroe.com/audioamp-click
I am using the STM32 Nucleo-L433RC-P development board to send the I2C command, but it is not responding…
Part Number: LM48100Q-Q1 Tool/software: I am using the audio amplifier LM48100Q which has:
a permanent 3.3V supply for the IC2VDD pin
because the MCU I2C is at 3.3V level
a switched 5V supply for the VDD pin
it can be turned off to save…
Thanks Lei
Talking about shutdown current, I am using a development board that uses the TPS61230A ( MIKROE-2757 Boost 4 Click)...
https://www.mikroe.com/boost-4-click
With the TPS61230A connected to a 1S LiPo battery, I measured the input current…
I studied the MIKROE ADC15 https://www.mikroe.com/adc-15-click?srsltid=AfmBOormPq3HM2fr89fdGeZ42l9zzCptcjuqEG5MI0xf-5LSQmT-cpz8 ADS131M02 demo board. The CLKIN is only 1kHz. I am surprised that it can operate at this low frequency. Should we try 1kHz…
Part Number: MCT8316A Tool/software: I use a Brushless 25 Click dev board from Mikroe connected to an STM32 Nucleo F103RB board. The 3.3V rail is regulated on the Nucleo board which is supplied by my laptop. The 24V VM rail is supplied with an external…
Hi John,
Unfortunately, I don't have the EVM board to use the GUI — I’m using the LDC1101 Click Board (MIKROE-3240). I’ve managed to get the RP+L mode working but can only read valid RP_DATA. The L_DATA seems stuck at a constant value, and in LHR mode…
Part Number: BQ25887
Tool/software:
I am attempting to utilize the balancer 5 click( Balancer 5 Click | Mikroe ) which utilizes the BQ25887 in one of my projects. I am using it as a breakout board with my Arduino. The Arduino has successfully identified…
Hi Chris,
MikroE board: https://www.mouser.es/ProductDetail/Mikroe/MIKROE-5682?qs=17ckDYBRdenIBQxkWz4Svw%3D%3D
I found the KM003C and already order it for try (not in Amazon Europe because too expensive). But I should received it on April 19.
GUI…
Part Number: BQ20Z60-R1 Other Parts Discussed in Thread: BQ20Z655-R1 , BQ-BATTERY-PROGRAMMER-SW , MKST-3P-ALT-EV2300 Tool/software: Hello,
I am trying to download a SENC file to a gas gauge chip (bq20z655-R1) using the SDK (BQ-BATTERY-PROGRAMMER-SW…
