Search tips
Showing 207 results View by: Thread Post Sort by
    Answered

  • MSP-EXP430FR4133 Launchpad program only runs in debug mode.

    Resolved
    Other Parts Discussed in Thread: MSP-EXP430FR4133 MSP-EXP430FR4133 Launchpad, Rev 1.0, Windows 10 Home, CCS Version: 6.1.2.00014, using on board debugger. The launchpad program only runs with CCS in debug mode. Program stops when I terminate the debug…
    • Resolved
    • Answered

  • Energia for MSP-EXP430FR4133

    Resolved
    Other Parts Discussed in Thread: MSP-EXP430FR4133 , ENERGIA Hello, When does Energia support MSP-EXP430FR4133? Best Regards, Nomoto
    • Resolved
    • Answered

  • MSP-EXP430FR4133 Help Needed

    Resolved
    Other Parts Discussed in Thread: MSP-EXP430FR4133 , MSP-FET , MSP430FR4133 Purchased MSP-EXP430FR4133 and everything worked. Loaded CSS 6.1.0 and was planning on exerpimenting with basic project provided. Started new project and selected target. Opted…
    • Resolved
    • Answered

  • Program the CC1310EMK using the eZ-FET Rev1.2 from the MSP-EXP430FR4133

    Resolved
    Other Parts Discussed in Thread: MSP-EXP430FR4133 , LAUNCHXL-CC1310 Hi all, Can I program the CC1310EMK board using the eZ-FET Rev1.2 programmer from a MSP-EXP430FR4133 LaunchPad? If not, what is the best inexpensive way to do it? Thanks in advance…
    • Resolved
    • Answered

  • MSP430 drivers for MSP-EXP430FR4133

    Resolved
    Other Parts Discussed in Thread: MSP-EXP430FR4133 , MSP430FR4133 I just opened the MSP430 FR4133 LaunchPad Development Kit MSP-EXP430FR4133 box and on the Quick-Start Guide I read that for proper operation, drivers are needed. Up to now I worked with…
    • Resolved

  • "1.5-V reference factor" of "Calibration tag" TLV has a value of 0xFFFF (65535). (MSP-EXP430FR4133 )

    TI Thinks Resolved
    Other Parts Discussed in Thread: MSP-EXP430FR4133 I'm using a MSP-EXP430FR4133 board to develop our application before our own HW is ready. I found the value of "1.5-V reference factor" is 0xFFFF (65535). #define CALREF_GAIN_1V5 *((uint16_t *)0x1A20…
    • Answered

  • Can my MSP-EXP430FR4133 program a MSP430L092 via J101 even with the voltage difference?

    Resolved
    Other Parts Discussed in Thread: MSP430L092 , MSP-EXP430FR4133 , TXB0108 If I've got the MSP430L092 working at 1.5V and the eZ-FET part of the MSP-EXP430FR4133 board is at 3.3V, can the I/O of the low voltage part handle that?
    • Resolved
    • Answered

  • RE: MSP430FR6043: Footprint for the FH-1138P

    Resolved
    Hi Ezra, I think you could find the footprint of FH-1138P in the hardware design files of below link: MSP-EXP430FR4133 1_05_00_01 - TI.com

  • Starterware/MSP430FR4133: How do the MSP-EXP430FR4133 LaunchPad development kit and the ADS7042 Ultra-Low Power Data Acquisition BoosterPack function in combination? Read it here

    Part Number: MSP430FR4133 Other Parts Discussed in Thread: MSP-EXP430FR4133 , ADS7042 Tool/software: Starterware Retired electrical engineer and electronics enthusiast Ajoy Raman , puts the ADS7042 BoosterPack and MSP430FR4133 through their paces in a…

  • RF430FRL152HEVM: Request for Clear Code to Transmit and Read ADC Values via NFC

    Part Number: RF430FRL152HEVM Other Parts Discussed in Thread: DLP-7970ABP , MSP-EXP430FR4133 , , RF430FRL152H , MSP-FET Tool/software: I'm using the RF430FRL152HEVM to send ADC values via NFC, with the reader setup consisting of the MSP-EXP430FR4133…

Didn't find what you are looking for? Post a new question.