Are you using one of those Kentec Boosterpacks linked off of this page: www.ti.com/.../boosterpacks.html ?
Can you let me know which of those you are using with the MSP-EXP430FR5969 Launchpad (provide the link, there are multiple Kentec boosterpacks…
Other Parts Discussed in Thread: MSP-EXP430FR5969 Hi I'm trying to connect my computer using CCS to the MSP-EXP430FR5969 and I'm receiving the errors (1), followed by (2) below. I then tried to update the software, and clicked "check for updates" and…
Hello Abhishek,
I would suggest using the newer MSP-FET debugger. An alternative would be using the on-board eZ-FET or eZ-FET Lite debugger on a LaunchPad (e.g. MSP‑EXP430FR5969, MSP-EXP430FR2311) to program the MSP430I2041 through its two-wire SBW…
If you only require one ADC analog input pin then you can use P3.0/A12, if you need more then you will have to consider using P1.3-P1.5 for ADC functionality instead of the right slider elements. You can use any remaining GPIO pin as CS for the SD card…
Other Parts Discussed in Thread: ENERGIA , MSP-EXP430FR5969 , CC3100BOOST , CC3100 Hi,
I've just got a CC3100BOOST booster pack and try to get it running on the MSP-EXP430FR5969 LaunchPad using Energia.
First WiFi example, ConnectWithWPA, however…
MArco,
Most crystals have a load capacitance between 6 to 9 pF and the common convention is C1, C2 = 2*CL – Cparasitics where C1/C2 are the parallel caps and Cparasitics (sometimes referred to as stray capacitance) is 2 pF for MSP430 devices but can…
Hi Brett, You mentioned that you are using the MSP-EXP430G2 Launchpad as your debugger. I have found that this is your root cause - this eZ-430 debugger does not officially support MSP430F5xx devices - it was not designed to and is not tested with them…
I am not sure, but the PC <=> Olimex dll/firmware may not be able to handle MSP430FR5969 via CCS yet.
You have a much better chance with TI hardware tools (even the low cost MSP-EXP430FR5969 Rev 2).
Hi David,
Great work on porting this project to the MSP-EXP430FR5969 and thank you for making this announcement and sharing with the community! Be sure to also post your project to the 43oh forum so that it gets as much attention/interest from the…
