Other Parts Discussed in Thread: MSP-EXP430FR5739 , MSP430FR5739 Hello I loaded the board msp-exp430fr5739 FRAM example of Texas Instruments did not work then charge
for example, there is written
NOTE: Running this example for extended periods will…
Other Parts Discussed in Thread: MSP-EXP430FR5739 Hello,
is there any detailled site that describes how to flash a compilled program through the FRAM board? i am aware, that the programming interface is thge same as the launchpad. if i compile in CCS…
Other Parts Discussed in Thread: MSP430F5529 It is good to see MSP's using FRAM!
Per my understanding, FRAM requires more space than FLASH ... which explains the limited storage space.
It would be great if MSP's provided FLASH and FRAM (triple deck…
Other Parts Discussed in Thread: MSP430FR5739 , MSP430FR5969 msp-EXP430fr5739 FRAM example of Texas Instruments did not work then charge
for example, there is written
NOTE: Running this example for extended periods will impact the FRAM endurance.…
Other Parts Discussed in Thread: MSP-EXP430FR5739
i made a design using CC3000 and Atmega382 micro controller , i need to test the CC3000 directly and see if it works well with the current board design. The radio tool seemed to be the best solution…
Other Parts Discussed in Thread: MSP-EXP430FR5739 , MSP430FR5739 Hello,
I am having an issue with the home application….
I have the MSP-EXP430FR5739 FRAM Experimenter Board with TiWi-SL module and the IAR IDE. I was able to compile, download,…
I have a CC3000EM connected to a FRAM MSP-EXP430FR739. The FRAM is USB connected to my Win7 PC. Not sure of exactly what I did, but I managed to communicate with the FRAM via Hyperterminal at one time. But for some reason I lost that Hyperterminal communication…
You can observe the output at the other end of your Serial print -- another device such as PC or something like that.
You need to be aware that gravity is equivalent to a big acceleration (> 30 ft/sec/sec). It Z is not aligned with the plumb-line, all…
Steve Wenner said: do I reset at main or will I pick up from the stack where I went into LPM3.5? The MSP430FR4xx and MSP430FR2xx Family User's Guide has the following:
If the application needs to pick up from where it left off, then Compute Through…
Other Parts Discussed in Thread: SIMPLICITI Hi all,
I am developing simple led blink radio application between two (CC1101-1190 + EXP FRAM 5739).In my implementation one set of 1101-1190 with FRAM 5739 is just a pure transmitter and the other set is…
