Part Number: MSP-GANG Hello, we are moving to 64 bit processes and I know the MSP-GANG dll is not available in 64bit. I am curious though if there is any way to work around this, since the programming tool software can still run on a 64 bit machine. Is…
Part Number: MSP-GANG Hello：
The checksum displayed by the GANG does not match the checksum displayed on the GUI.
The left display a 4-bit checksum and the right GUI has an 8-bit checksum.
Using the calculations in the manual, I got the 8-bit…
Part Number: MSP-GANG Just wanted to give an update to anyone who might be having this same problem after trying all the steps in the thread below:
https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power…
Part Number: MSP-GANG Hi team,
We're trying to use MSP-GANG to program devices and can't seem to set the JTAG_SPEED correctly.
We're using the provided c-file for the MSP-GANG, but unclear how we should set the JTAG_SPEED so that when we are using…
Part Number: MSP-GANG Other Parts Discussed in Thread: UNIFLASH Hello,
Is there a way to enable programming of MSPM0 devices with a set SWD password using MSP-GANG?
Currently there's no options for this in the MSP-GANG GUI so the customer is forced…
Part Number: MSP-GANG Other Parts Discussed in Thread: MSP-FET , Hi Team,
Hope this finds you well.
We are wondering if
・MSP-FET
・MSP-FET430UIF
・MSP-GANG
is supported in WINDOWS 11 separately please?
If it is not supported, do you have…
Part Number: MSP-GANG Dear specialist
MSP-GANG: Gang Programmer for MSP MCUs GUI -->Memory options -->Main Memory Only
which is “erase-main” in following definition？
CFG_FLASHERASEMODE 11 #define ERASE_NONE_MEM_INDEX 0 #define ERASE_ALL_MEM_INDEX…
Part Number: MSP-GANG Tool/software: Order T05140293 Order model MSP-GANG, the quantity is 1pcs
The customer testing process found two problems: Problem 1: eight-way burner, can only use four at the same time. Problem 2: Channel 4 cannot use the burn…
Part Number: MSP430F5342 Other Parts Discussed in Thread: MSP-GANG I have product which has a MCU chip MSP430F5342 to be programmed. For programming I am using MSP-GANG debuger and software from TI. But, whenever i am trying to program, I get the ERROR23…
Part Number: MSP430G2744 Other Parts Discussed in Thread: MSP-GANG HI,
What has happened when selecting "Apply DCO calibration..." in MSP-GANG GUI tool?
What calibration has been applied with this select? My customer has been facing trouble for writing…
