Search tips
Showing 393 results View by: Thread Post Sort by

  • RE: galvanic separation for debugging/programming stability

    Hi bart, Please check if those post can help you: https://e2e.ti.com/support/microcontrollers/msp430/f/166/p/911046/3370283?tisearch=e2e-sitesearch&keymatch=MSP-ISO#3370283 https://e2e.ti.com/support/microcontrollers/msp430/f/166/p/813061/3016004…
    • Answered

  • RE: CCS/MSP430F67791A: EMDC Generated code validation

    Resolved
    Hi Eason Zhou We are want to know the some details about this project 1.We want to test EMDC GUI Your Hardware Connection is, EVM430-F6779 + MSP-ISO + MSP-EXP430F5529LP Let me know the following Hardware connection is possible to communicate…

  • MSP430FR5994: Need HID code for EMDC

    TI Thinks Resolved
    Part Number: MSP430FR5994 Other Parts Discussed in Thread: MSP430F5529 , MSP-ISO , Hello, I go through the EMDC(Energy Measurement Design Center ) for calibration. For GUI interface need some extra hardware like MSP430F5529 and MSP-ISO. And there is…
    • Answered

  • MSP430FR5994: Isolating Spy-by-wire

    Resolved
    Part Number: MSP430FR5994 Other Parts Discussed in Thread: MSP-ISO What IC or discrete parts solution would you recommend to isolate the spy-by-wire link of a MSP430FR5994? We need around 2.5kV isolation. Regards, Frederic
    • Resolved

  • MSP430G2955: galvanic separation for debugging/programming stability

    TI Thinks Resolved
    Part Number: MSP430G2955 Other Parts Discussed in Thread: MSP-ISO I've been working with MSP430 for 10 years and one thing bothers me: the debugging/programming link is not very stable. For battery fed applications, there's usually no problem, but If…

  • galvanic separation for debugging/programming stability

    TI Thinks Resolved
    Part Number: MSP430G2955 Other Parts Discussed in Thread: MSP-ISO I've been working with MSP430 for 10 years and one thing bothers me: the debugging/programming link is not very stable. For battery fed applications, there's usually no problem, but If…
    • Answered

  • MSP430F6775: Can I use the IAR Embedded Workbench IDE to get the value of the register

    Resolved
    Part Number: MSP430F6775 Other Parts Discussed in Thread: MSP-FET , MSP-ISO Hi I would like to read the value of the registers in the SLAA577G - MSP430F677x(a) based MCU using JTAG. I think I need to use the Isolation Plugin Board, but how do…
    • Resolved
    • Answered

  • RE: MSP430I2041: Error when I use on Uniflash load image file

    Resolved
    Nguyen van Dung said: I successful download code HID for MSP430F5529 Did you do anything to resolve the error in UniFlash? Nguyen van Dung said: HID connected but don't connect to device and not display in Status Bar with Device Name and FW ID, only…
    • Answered

  • MSP430I2041: MSP430i2041 with EMDC and CCS and read result over I2C

    Resolved
    Part Number: MSP430I2041 Other Parts Discussed in Thread: TIDM-3OUTSMTSTRP , , MSP-ISO , UNIFLASH , MSP430F67791 , MSP430G2553 Hi. My name Dung. I have project with MSP430i2041 EVM 1 Voltage (990K-2.4K - 220VAC max 250V), 3 Current (CT 1000.1, R …
    • Resolved

  • CCS/MSP430F6779: Getting Started with EVM Board and EMDC Program - Cannot Communicate with I2C

    Part Number: MSP430F6779 Other Parts Discussed in Thread: UNIFLASH , MSP-TS430PEU128 , MSP-ISO , MSP-EXP430F5529LP , MSP430F5529 , , Tool/software: Code Composer Studio [Edit from TI] Make sure you're using the latest EMDC version. Also, several updates…

Didn't find what you are looking for? Post a new question.