Part Number: MSP430F1121A Dear Ti designer or engineer,
Our products needs your help.
When we use the chip msp430-1121a which is developed by your company, we encountered the following problems:
When the ports p2.3 and P2.4 are used as analog comparator…
We have dedicated voltage reference solutions which should be stable over temperature you can find here:
If you are using this reference with an integrated…
Part Number: MSP430F1121A Other Parts Discussed in Thread: MSP-TS430DW28 Hi Sir,
This is IC programmer manufacturer.
We help customer to develop the programming tool on our programming systems.
Now, customer needs MSP430F1121AIDGV (TVSOP20)and we didn…
Part Number: MSP430F1121A Hello.
The question: Can the MSP430F1121A accept a higher crystal frequency than 32.768 kHz when in LF mode (XTS=0)?
I am using a 38.4 kHz watch crystal with MSP430F1121AIPW. I am using the crystal as a frequency…
Part Number: MSP430F1121A Hi Support,
my customer is claiming a Voltage Reference Issue on MSP430F1121A when operating at Vcc=3,3V. In particular, it seems that VRef050 is 0,51V at 23°C, where maximum value should be 0,5V@3V.
Is it possible that this…
Part Number: MSP430F1121A Other Parts Discussed in Thread: MSP-TS430DW28 , MSP-FET I have recently bought some MSP430F1121A from mouser and they are not recognized by the setup,
I tested it against some old parts on some prototypes that was recognized…
Mainly because I want to use the Spy-Bi-Wire interface. But when I simply swapped the chips, it did program over traditional JTAG, but the application didn't work.
Did I miss something in the pinouts or config registers?
I'm using TimerA in up/down count mode to create a PWM signal on I/O pin P1-2. The timer uses an external 32K clock and I use CCR0 and CCR1 to vary the pulse width (Output Mode 6). For the most part this works fine and as expected but occasionally…
Part Number: MSP430F1121 Other Parts Discussed in Thread: MSP-FET , UNIFLASH I am facing issue while programming MSP430F1121A IC.
Is this any difference between two programmer MSP-FET430UIF and latest MSP-FET Flash Emulation Tool(Black plastic…
Part Number: MSP430FR2433 Other Parts Discussed in Thread: MSP430F1121A Hello
Could you tell me which is the lowest power solution in following cases?
1.set as output direction (High or Low?)
2.set as input direction with internal pullup/pulldown(pullup…