Part Number: MSP430F1222 Other Parts Discussed in Thread: MSP-FET , UNIFLASH Hi e2e,
I am using MSP430F1222 device and i have
1) MSP-FET programmer
2) Programming file Prog.d43
i need to know utility/ software from where i can program the device…
Part Number: MSP430F1222 Dear Forum,
I am a little bit confused by Fig 18-3 in the MSP430F1xx manual showing how the ADC10 takes a sample.
Note, precise samping became important if higher frequency AC signals need to be digitized.
Assuming Tmer_A…
Part Number: MSP430F1222 Other Parts Discussed in Thread: MSP-GANG , MSP-FET If we use the MSP-Gang Programmer software, we can program the MSP's.
If we use the example program from LabVIEW, we get the error 23 MCU init failed.
Kind regards Tim…
Part Number: MSP430F1222 Other Parts Discussed in Thread: LMC555 Dear Forum,
I would like ask how the TA OUT Unit works in Capture mode? Becasue the user's manual only detailes the operation for compare mode.
In other words: EQUx (EQU changes the…
Part Number: MSP430F1222 We are in program wide reviews of data retention of our programmable memory devices on our boards. The main part reason for this Review is FLASH TYPE parts that can lose data when left unpowered for an extended period of time…
Hi Sean,
The problem I have is that the SMCLK is NOT being sourced from the DCO. In my NMI service routine, I am trying to set the SMCLK to run off the DCO but it isn't working.
The document section you refer to discusses how MCLK (not SMCLK) is automatically…
Other Parts Discussed in Thread: MSP430F1222 I have been using the MSP430ez for a few weeks and ran into a problem where the targets supported by the ez don't have enought IO pins for my application.
I ordered the F1222 because I had some surface mount…
Other Parts Discussed in Thread: SN6501 , MSP430F1222 , RC4580 , SN74AHC1G04 Dear Forum Members,
Im working on a data acquisition circuit with USB connection and I experience high noise level despite the presence of isolation. Plese see the attached…
Hi Eason,
Thanks for your quick reply, I really appreciate the effort in supporting the community!
I looked in the ref manual for the MSP430x1xx Family here (Ti site)
-> https://www.ti.com/lit/ug/slau049f/slau049f.pdf
An I also looked in the datasheet…
Other Parts Discussed in Thread: MSP430F1222 Hi,
I have a project using MSP430F1222.
CPU oscillator is 6.4MHz. this is the frequency of timer A tick too.
In the ISR of timer A CC0 I measure how many ticks it takes to execute the following code…
