Part Number: MSP430F1232 Hi All;
TL;DR:
How to reduce total unadjusted error in adc10? Are there calibration registers we can rely on or we need to calibrate and provide fw characterization?
Verbose
In the process of mantaining and update legacy products…
Part Number: MSP430F1232 Hi,
The customer got an error that the crystal did not oscillate in one of the 1000 mass-produced units.
They design the crystal connection as follows:
They solved the problem by adding a 15pF capacitor between the Xout terminal…
Part Number: MSP430F1232 Hi experts,
Is there a specification for DVCC rise time of MSP430F1232?
I checked the data sheet of MSP430F1232 , but there was no specification of "dVCC/dt".
I want to know the minimum and maximum DVCC rise time of this…
Part Number: MSP430F1232 Hi,
Good Day. Customer have MSP430F1232 in the SOIC-28 package, he use code composer and BSLDEMO2.EXE with USB CP2102 serial adapter to program the chip. My problem is he did by mistake enable the NMI MODE of the MSP430F1232. After…
Part Number: MSP430F1232 Hi,
If the customer's board is set to DCO immediately after the power is turned on, the device will not operate properly. (CPU stopped)
After turning on the power of this board, insert a Wait of about 100ms, and then set the…
Part Number: MSP430F1232 Other Parts Discussed in Thread: MSP-GANG Hi Team,
Can you have a look at the following customer software questions regarding MSP-Gang?
Programming via JTAG works, for remote control of the MSP-Gang I have 2 questions however …
Part Number: MSP430F1232 Other Parts Discussed in Thread: MSP430G2553 Hi Team,
Good day! Could you help our customer?
Here it is.
1- I want to read 2 analog input with msp430f1232 , A0 and A1 . I write the code blew to do that. My problem is I can not…
Part Number: MSP430F1232 Other Parts Discussed in Thread: MSP430F2132 Hello,
we have a board using MSP430F1232, we used to have brownout protection in the power supply circuit, but we removed it in the new board. now MSP430F1232 stops working after recycle…
Part Number: CCSTUDIO-MSP
Hi team,
My customer have Msp430f1232 chip and program it with code composer with BSL bootloader. He want to know there is a method to read out code from MSP430F1232 and format in hex file in CCS.
He bought a MSP430G2 lunch…
Part Number: MSP430F1232 Other Parts Discussed in Thread: MSP-TS430DW28 , MSP-EXP430FR5969 , MSP-FET Hi Team,
A customer wants to use MSP430F1232 using Code Composer Studio. He doesn't have an MSP-FET instead he wants to use the built-in eZ-FET from …
