Part Number: MSP430F135 Tool/software: Hello
we have problem when I used MSP430 Flasher software tool to access MSP430F135 device, and gives information below:
And the successful information is below:
We tried more than 10 pieces and have…
Part Number: MSP430F135 Tool/software: Please provide max junction temperature for part MSP430F135IPM. Also where can we directly find Mam Junction temperature for all the parts where it is not provided clearly in the part datasheet. Is there any common…
Part Number: MSP430F135 Other Parts Discussed in Thread: MSPBSL Hi MSP430 Team,
I would like this programmer we are developing to reprogram the MSP430 while we are doing the Languages.
The MSP430 we use is MSP430F135 which has BSL pins.
I was…
Part Number: MSP430F135 I ask Verilog A Model for MSP430F135. But you answered " Sorry, we don't provide such model.".
What is the reason not providing such models?
Winter Yu replied to MSP430F135: Verilog A model for MSP430F135 .
Hello,
Sorry…
Part Number: MSP430F135 We are using TI controller MSP430F135IPM in our one of the product. Kindly send us Verilog A model of MSP430F135IPM for circuit simulation in PSPICE.
Part Number: MSP430F135 Hi Team, we would like to seek your guidance on how to perform self run test.
1. Component is present on the I2C bus ( e.g get the chip ID). 2. Internal RAM test. 3. Internal Flash test. 4. Basic to Comprehensive MCU functional…
Part Number: MSP430F135 Tool/software: Code Composer Studio Dear Sir,
Today I down loaded CCS10.1.1.00004_win64 for development with MSP430. Is there license requirement for it? Or simply I install it and use. Please clarify
Part Number: MSP430F135 Hi,
I had asked about programmig 8 MSP devices previously and got introducted to the MSP GANG (thanks!)
I have a followup question.
These products are fairly large, 12” x 12” and I have 8 laid out on a 8’ x 4’ Table.
…
Part Number: MSP430F135 Other Parts Discussed in Thread: MSP-GANG Hi,
We have worked with MSP430F135 in the past. Today, we program 6 units at a time using Hardware USB-FPA 6.1 Elprotronic and Gang Pro 430 GUI. I wanted to know if you have expanded…
Regarding your questions
1st
No, device is not subjected to higher temperature in burn-in.
Soldering is done using reflow method by outside assembly house
2nd
Comment doesn't appear to applicable to the 12 bit ADC variant of the MCU MSP430F135…