Part Number: MSP430F147 Hi,
We are using MSP430147, be connected that will loop data back to the SPI Master (the CPLD).
The raw clock signal coming into the CPLD has Freq: 1.85 MHz, Prd: 542 ns.
The SCLK signal path is as below :
Raw clock ( 542 ns…
Part Number: MSP430F147 Hi,
We are using MSP430F147 in our boards with a 8Mhz on XT2.
On few of our boards, we see that the microcontroller cant seem to get a stable XT2 for ever.
i.e the OSC fault is never gets cleared. We tried replacing the oscillators…
Part Number: MSP430F147 Hi team,
my customer is using the MSP430F147 and hava a few questions about it:
The datasheet SLAS242F shows the representation of the supply Voltage and the frequency. Now at the new datasheet the Figure 5-1 has changed.
SLAS2…
Part Number: MSP430F147 Other Parts Discussed in Thread: MSP430-FLASHER ,
Tool/software: Code Composer Studio
Detail of my output.txe.txt :
* -----/|-------------------------------------------------------------------- *
* / |__ …
Part Number: MSP430F147 Tool/software: TI C/C++ Compiler What is the CCS equivalent of the IAR __no_init placed before an array declaration?
__no_init unsigned char array[512];
Is it #pragma RETAIN(array); or does this just tell the linker to include…
Part Number: MSP430F147 Tool/software: TI C/C++ Compiler I am converting a program from IAR to CCS. Being at the memory limit of my device, I must have the optimizer set to as high as possible for size. That makes debugging difficult. When using IAR,…
Other Parts Discussed in Thread: MSP430F147 Hi,
In the datasheet of MSP430F147 says that:
Ultralow-Power Consumption:
− Active Mode: 280μA at 1 MHz, 2.2V
My question is:
If the MSP430 is 1h in active mode that means the power consumption is…
I'm wondering if I should tie VeREF+ and/or VREF-/VeREF- to ground. Currently I have VREF-/VeREF- tied to the ground of my Vref decoupling cap, and VeREF+ floating.
I know it is good practice to tie unused digital inputs to ground (or set them to outputs…
Other Parts Discussed in Thread: MSP430F147 I was wondering if you have a listing of how much current the peripherals on the MSP430 use.
The only thing I could find was the comparator.
We are using the MSP430F147 in a battery operated product. We would…
Other Parts Discussed in Thread: MSP430F147 I'm getting the dreaded "Chosen derivative (MSP430F147) and actual hardware (Device_unknown) do not match." If I choose to "continue to download" it looks like it is programming the flash but…
