• 

  Mechi Fendel

  • 1 month ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  MSP430F148: Why does IDE only "see" one of the conditions in the function? Why can't I see float values in the debugging?

  • Resolved

  Part Number: MSP430F148 Hello, This function is called with the ADC 12-bit value of temperature
• 

  Cedrick Jimenez

  • 10 months ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  MSP430F148: program with Olimex LPC2294

  TI Thinks Resolved

  Part Number: MSP430F148 Hi, Good day. I hope everything is fine there. Our customer needs to change program in eeprom memory of MSP430F148. They want to know if they can use the Olimex LPC2294 for this purpose. I would appreciate if you could share information...
• 

  Bart

  • 11 months ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  MSP430I2021: Questions about external resistor tolerance and calibration, different clock frequency and unique memory identifiers

  TI Thinks Resolved

  Part Number: MSP430I2021 Team, we are prototyping with I2021 and have a few questions, We will use external resistor for the oscillator. The tolerance of the resistor recommended in the datasheet is 0.1%, but in practice it's possible we'll...
• 

  Bob Scott

  • over 2 years ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  RE: CCS/MSP430F148: The Debug Interface to the device has been secured

  Dear Britta You nailed it. The Reset line was loose at the connector to the target. Fixed and now all working fine. Sorry to be so long in responding. TT internet is dpwm om the Dallas area due to a lightning strike caused fire in their data center...
• 

  Bob Scott

  • over 2 years ago
  • Code Composer Studio™
  • Code Composer Studio™ forum

  RE: CCS/MSP430F148: MSP430FEt

  Thanks - That did it!!! Regards Bob
• 

  Hermann Dorsch

  • over 3 years ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  MSP430F148: Searching a solution for a Display Problem

  Part Number: MSP430F148 Hello We have here a system with an MSP430F148 which is used with a Philips PolyLed display. >> Philips No. 3322 161 23352; Bus interface is probably I²C. Panel: 47mm / 1.8" PolyLed monochrome No.: 324004 13-A03...
• 

  Rajesh Dhoot

  • over 6 years ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  Error detecting MSP430F148 and CCS 6.0.1.00040

  Hello, I am using MSP430F148 in one of our project and FlashPro430 to program it. When I use FlashPro430 as a programmer using JTAG-4 Wire it program the device. I have a problem with CCS and FlashPro430 as a debugger. CCS studio detects FlashPro430...
• 

  ivashko hesevic

  • over 7 years ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  Errors "Security fuse has been blown" and "Could not find device"

  Hi! I know that my problem is unsolvable, so my message is like a cry from the heart) I've read so many posts about this problem. And any of solutions didn't help me. I develop a device with MSP430F148. I use MSP430-JTAG-TINY-V2 to debug...
• 

  Jace H

  • over 4 years ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  RE: MSP430F248: MSP430F248 assembler: Enable Interrupts (EINT) followed by enter LPM3 followed by RET - NOP required?

  Hello Lo2, MSP430F148 is not affected by CPU19 as indicated in its errata document. However, upon further investigation, this part is labeled as possibly affected, but has never been confirmed. Hence why it is not in the errata document. This is unusual...
• 

  Anonymous

  • over 7 years ago
  • MSP low-power microcontrollers
  • MSP low-power microcontroller forum

  RE: MSP430 UART RX Problem

  Hi all, Interesting topic here... I wanted to get my MSP430F148 generate a baudrate of 115200 at XTAL2 4MHz divided by 4 = 1MHz, didn't worked at all, so I decided to go a few steps back: Baudrate = 2400 @ 32768Hz --> Works fine Baudrate...

Didn't find what you are looking for? Post a new question.

• Ask a new question