Search tips
Showing 21 results View by: Thread Post Sort by

  • MSP430F6436: MSP430F6436 power supply inrush current

    Part Number: MSP430F6436 Hi, When the power is applied to the MSP430F6436, an inrush current of about 30mA flows. I would like to reduce this inrush current to 10mA. Q1 When I use the minimum capacitor value recommended for the MCU power supply, the…

  • MSP430F6436: MSP430F6436 power supply freeze on start-up

    Part Number: MSP430F6436 Hi, MSP430F6436 freezes at low frequency during power-up. When viewed in debug mode, the debugger also seems to give a message that points to an address that deviates from the programme and is probably out of control. It is…

  • MSP430F6436: DAC glitch when using P6.6 and P7.6 at the same time

    Part Number: MSP430F6436 Hi, 0.4 to 2.0V output is generated from a reference voltage of 2.5V using DAC0 on P6.6. If you use it as the port GPIO of P7.6 and set it to High, the output of DAC0 of P6.6 will drop by about 0.15V from the current output…

  • MSP430F6436: Voltage may be generated from the port during ADC operation and the voltage cannot be measured properly.

    Part Number: MSP430F6436 Hi, A3 12-bit ADC is used in the ADC, but sometimes voltage is generated from the ADC port during operation and the voltage cannot be measured normally. The thermistor attached to the ADC is measuring with intermittent operation…

  • MSP430F6436: Calculating checksum on TI tools

    TI Thinks Resolved
    Part Number: MSP430F6436 Other Parts Discussed in Thread: UNIFLASH , CONTROLSUITE Hello, Are there any way to calculate checksum value on CCS or Uniflash or other TI tools? Regards, U-SK

  • MSP430F6436: Japanese Users Guide

    TI Thinks Resolved
    Part Number: MSP430F6436 Hello, Is there Japanese Users Guide for MSP430F6436? How can I find Japanese materials for MSP430, including other devices? Regards, U-SK

  • MSP430F6436: Firmware update using UART based on USCI

    TI Thinks Resolved
    Part Number: MSP430F6436 Hello, I would like to update the firmware using UART based on USCI peripheral. But when using BSL, I found P1.1 and P1.2 which is not UART port is used. Could you tell me how to update the firmware using UART based on USCI…
    • Answered

  • connecting MSP430F6436 to bluetooth module

    Resolved
    Other Parts Discussed in Thread: CC2541 , MSP430F6436 , MSP430F5529 I was wondering, what is the best option to connect bluetooth module (cc2541) to MSP430F6436? Thanks
    • Resolved

  • MSP430F6438: What if the internal DAC is not used?

    TI Thinks Resolved
    Part Number: MSP430F6438 Other Parts Discussed in Thread: MSP430F6436 , MSP430F6435 , MSP430F6433 Hi, The MSP430F643x series in the 100-pin PZ package comes in four variants - MSP430F6438 (256kB Flash + DAC) - MSP430F6436 (128kB Flash + DAC) …
    • Answered

  • Clock Configuration Startup file

    Resolved
    Other Parts Discussed in Thread: MSP430F6436 , MSP430F6438 , MSP430WARE Hi all I am using MSP430F6436 and using IAR to do coding for the drivers. I want to confirm if there is a clock configuration startup file provided by IAR or TI. I was previously…
    • Resolved

Didn't find what you are looking for? Post a new question.