Part Number: MSP430F6733 Hi Team,
1MSP430F6733(80pin) does not wake up after several times of /RST switching.
keeping 3.3V on VDD, if I apply PWM that has 2s offtime and 1s on time on /RST port, after 20s~40s, device does not wake up and can't reset…
Part Number: MSP430F6733
Hi,
I have a question about SD24_B input range. Accoding to Absolute Maximam Ratings, SD24_B input pins (SD0N0, SD0P0,SD1N0, SD1P0, SD2N0, SD2P0 -0.3V min ~ Vcc + 0.3V max
And 5.15 SD24_B specs ( Page 52 ), Common-mode input voltage…
Part Number: MSP430F6733 Hi team,
I need your help for the below case.
Application: e-metering.
After working some time in an aging room where we maintain temperature (still within operating range) and switch on/off voltage current, all the flash sections…
Part Number: MSP430F6733 Other Parts Discussed in Thread: MSP-GANG , Team,
I need to unlock the JTAG of MSP430F6733. so far, I can use MSP-GANG BSL interface to erase the memory of MSP430F6733. I want to know how to use MSP-GANG to unlock the JTAG? Can…
Part Number: MSP430F6733 Other Parts Discussed in Thread: MSP-GANG I’m looking for a simple yet effective way to protect the chip from being read/reverse engineered/modified.
Part Number: MSP430F6733 Other Parts Discussed in Thread: MSP-GANG , MSP430G2452 ,
Team,
I tried to use BSL-SCRIPTER to open the locked JTAG of MSP430F6733,[I can use MSP-GANG to do the erase with the BSL function]. I used a msp430G2 LP[msp430G2452] and…
Part Number: MSP430F6733 Hello,
My customer put 1000nF=1uF on the VREF pin. Is it no problem for the SD24_B?
The DS recommends 100nF and accepts even 'no caps'. Then how about a larger cap like 1uF?
Under SD24REFS=1, the pin is fed 1.2V by a buffer…
Part Number: MSP430F6733
Hello, The DS p.14 says "(3) The pins VDSYS and DVSYS must be connected externally on board for proper device operation."
But a handy tester shows they are connected resistively. 1.5ohms on display.
Then can I ask the…
Part Number: MSP430F6733 Hi, On page 2 of Current-Transformer Phase-Shift Compensation and Calibration Application Report - SLAA122 (February 2001), Figure 1 shows mains voltage V, mains current I(in) and the output current I(out). I(out) is the current…
Part Number: MSP430F6733 Team,
I can't find an example to show the usage of the TX_DATA_BLOCK command in BSL-SCRIPTER. I called this function as below and the BSL-SCRIPTER crashed. please kindly suggest how to use this command.
LOG MODE 6xx COM98 VE…
