Part Number: MSP430F6734A Other Parts Discussed in Thread: MSP430F6779 Hi,
We have a metering application that use one battery and one main power.
VCC = 3.3V comes from AC power.
AUX1VCC = 3.6V battery
AUX2VCC = 0V grounded
AUX3VCC = VDSYS…
I don't want to erase anything. I already know the 4 byte Jtag password hold at address 0x17FC for MSP430F6734A.
Why does I still need to erase whole device?
Issue here, MSP430Flasher -p 0x22114433 doesn't do its job.
Part Number: MSP430F6734A Hello,
I'm trying to read Temperature sensor value that is calibrated by TI.
I use two calibration points provided by TLV located at 01A00h.
But my problem is that we always get around 10 degree difference between what…
Part Number: MSP430F6734A
Hi,
1) Why is there a timeout parameter in master mode of I2C module?
bool EUSCI_B_I2C_masterSendMultiByteStartWithTimeout (uint16_t baseAddress,
uint8_t txData, uint32_t timeout);
Isn't sending the data under the…
Part Number: MSP430F6734A Tool/software: TI C/C++ Compiler Hi,
We are using IAR 7.12 C for one of our project that use MSP430F6734A has 96 KB flash memory.
And IAR C compiler configured for large code model.
For diagnostic purpose, inside the…
Part Number: MSP430F6734A Other Parts Discussed in Thread: EVM430-F6736 , TIDM-THDREADING , TIDA-01088 , MSP430F67791A Hi TI Folk,
Good day to you.
Please advise that do the MSP430F6734A has capability to measure kwh until its 50 th harmonics? if…
Part Number: MSP430F6736A Other Parts Discussed in Thread: MSP430F6734A Hi Team,
Can you please check and advise with following request?
"
We are using MSP430F6736A and MSP430F6734A processors in our project, but we are having problems with UART…
Hi, No, PMM will not work, please see the Table 5-12 in chapter 5.8.5. msp430f6736a.pdf The test conditions is | dDVCC/dt |<3 V/s, 3V/5ns drop too fast. But I can't give an exact answer what the performance of MCU when it drop below 1.8V at a rate of…
As one more update, you can find the full revision table of compatible hardware and software revisions included in the release notes:
Release-Notes-MSP-GANG.htm
See the section called "Version Matrix"
