Part Number: MSP430FR2032 Hi Team,
Good day! This is our customer concern below and I'm posting it on their behalf.
My immediate problem is that on my new MSP430FR2032 hand control board,
SMCLK appears to be running about 5% fast, instead of 1.00…
Part Number: MSP430FR2032 Hello Team,
Good day. My customer knows that IBIS model for MSP430 devices is not available. However, they would like to run a simulation on UART line to check the signal quality. Do we have any other similar component or way…
Part Number: MSP430FR2032 Hi,
I have few MSP430FR2032 with on chip 30C calibration at higher error. The data stored at address 1A1Ah and 1A1Bh are relatively larger than normal unit causing temperature reading becomes 23C when actual temperature should…
Part Number: MSP430FR2032 The MSPFR4xxx_FR2xxx Family User Guide ( SLAU445G ) documents CSCTL4 bit 9 as read-only Bit.
The "MSP430FR2xx_4xx" DriverLib´s cs.c implementation of CS_initClockSignal clearly write 1 into it if called with CS_ACLK, CS_VLOCLK_SELECT…
Other Parts Discussed in Thread: MSP430FR2032 Hello All, request to please help me out with the below issues-
1.For the part MSP430FR2032IPMR does the active mode current into Vcc also include current consumed by all the internal modules like references…
Other Parts Discussed in Thread: MSP430FR2032 , MSP430FR2033 How long does it take for DCO to settle at 16MHz, referenced to REFO, when set to this configuration shortly following BOR? (w/ MSP430FR2032 & MSP430FR2033)
In the datasheet I see 120ms listed…
Hi Hong Zhuang,
You do not need to include the header, because the 'msp430fr2032' will take the same function.
Just using the code of toggle operation in your project shown in demo, complie then, and you should find it operate as expected.
B.R…
