Part Number: MSP430FR2153 Hello,
According to datasheet, ADC 10/12-Bit linearity/timing parameters are not described at Vcc 2.0V~.
(Question)
(1) Do you have ADC 10/12-Bit linearity/timing parameters at Vcc 2.0V~ ?
(2) From what power voltage can it support…
Part Number: MSP430FR2153 Other Parts Discussed in Thread: MSP-FET , MSP430FR2155 Hi Folks,
I have 2 boards with MSP430FR2153 and both say "Target must be connected before loading program". I monitored the spy bi-wire test and reset with a scope and see…
Hi,
You may need to check the BSL version on your board. For FR2153, the version is 00.09.36.B4 according to this app note.
https://www.ti.com/lit/ug/slau550aa/slau550aa.pdf
Best regards,
Cash Hao
Part Number: MSP430FR2153
I'm reading SLAU319AD REVISED JUNE 2020 which lists the pins for the BSL for each MSP430 part. However there's no listing in the resource table for "FR215x" series parts. The master table shows UART or I2C support…
Part Number: MSP430FR2153
Can you please help to answer the following question that came up during the design phase?
We supply an EEPROM with three pins of the MCU (P3.0-3.2). These are switched on together and must supply a maximum of 3mA.
Do you…
Part Number: MSP430FR2153 How the crystal oscillator in XIN/XOUT on MSP430FR2153TRSMR (VQFN-32) is selected?
What is the frequency value?
Any part no. suggestion for crystal?
XIN/XOUT (Pin No. 7 and 8) are HFXT or LFXT pins?
Part Number: MSP430FR2153 Other Parts Discussed in Thread: MSP430FR5969 Looking at the MSP430FR235x datasheet noticed that the Memory Organisation table doesn't show the addresses of the BSL ROM:
According to the MSP430™ FRAM Devices Bootloader (BSL…
Hi Bharat,
I'm sure you have figured this out already but I will post my findings for others to learn from this.
According to my findings, if you want to measure more than one channel without using interrupts you select SEQUENCE-OF-CHANNELS, ADCC…
