Part Number: MSP430FR5738 Hi team,
Here's an issue from the customer may need your help:
The P1.3 io port is configured in input mode through which the external input detection is done. The low level is detected all the time after power up, and the…
Part Number: MSP430FR5738 Other Parts Discussed in Thread: MSP430FR59471 I am using the msp430 header files for c, specifically the msp430fr5738.h and msp430fr59471.h. Running the code through a MISRA code inspection test results in some violations due…
Part Number: MSP430FR5738 Dear team,
The following is the value of the register printed out when it cannot sleep. It is currently impossible to determine what went wrong
The code is following
if (SYSRSTIV == SYSRSTIV_LPM5WU) {
//reset…
Part Number: MSP430FR5738 Hi
Is the following external oscillator available?
- which include Spread spectrum function
Center Spread: ±0.25%, ±0.5%, ±1.0%,±1.5%, ±2.0%, ±2.5%
- Freq: 24MHz
Thanks and Best regards,
HaTa.
Part Number: MSP430FR5738 Hi team,
Could you let me know the behavior of XOUT pin when I set XT1BYPASS flag 1? We want you to describe me the behaviors in XT1BPASS=0 and 1, additionally how it changes.
We are using the device with external clock signal…
Part Number: MSP430FR5738 Hi, MSP430 experts,
In Errata of MSP430FR5738, we can find Errata Number GC3.
In the workaround of GC3, the errata described "After LPM exit, reinitialize the interrup flags only after the first FRAM access has been completed…
Part Number: MSP430FR5738 Hi team,
Could you provide the increased supply current into VCC for Timer_A when the clock is changed from VLO to ACLK in standby mode (LPM3 With VLO) ?
Best Regards, Taki
Part Number: MSP430FR5738 Other Parts Discussed in Thread: MSPDS , MSP-FLASHER , UNIFLASH Hi,
our project is upgrading to latest IAR EW430 7.21.1, which contains (as listed on https://www.ti.com/tool/MSPDS?DCMP=msp430&HQS=mspds#overview and https:/…
Part Number: MSP430FR5738 Hi
If we are using the Xtal Oscillator instead of the quartz crystal unit, we will be entering the clock directly into the Xin instead of using the clock from the Xout.
Is this usage possible?
Thanks and Best regards…
Part Number: MSP430FR5738
Hi,
I am seeking product information on the MSP430 series that is available in Wafers and Die. The search site below doesn't seem to be working properly, so could you please provide me with the list information of the above…
