Part Number: MSP430F6433 Other Parts Discussed in Thread: MSP430FR6889 , Hello.
I have a question.
I would like to realize a capacitive touch sensing of RO system with MSP430F6433 or MSP430FR6889.
Is it possible to realize capacitive touch sensing of RO…
Other Parts Discussed in Thread: MSP430FR6989 , MSP430FR6889 Hi,
I have msp430fr6989 and want to perform OTA for the same. The system will work like: firmware is received from a gateway and is saved in external flash (SPI interface). Now the bootloader…
Hi Kishen,
You are correct. The MSP430FR6889 has an AES256 module, but not USB. The MSP430F5529 has USB, but not an AES hardware module.
If USB OTG is adequate, I'd recommend looking at the TM4C129 , which features this and an AES HW accelerator.
If…
Other Parts Discussed in Thread: MSP430FR5969 , MSP430FR6889 Hi old_cow_yellow Katie Pier ,
I Had another problem regarding DMA transfer. My DMA settings are as below.
DMACTL0 = DMA0TSEL__UCA0TXIFG;
DMA0SA = &buff;
DMA0DA = &UCA0TXBUF;
DMA0SZ = 600;…
Hi Ryan Brown1 , Yes When I read in data sheet it's says same. But How to check for the source. I have took break point and checked register at that time and the clock LFXT was set as 1 though I have not used it in my program. And when I tried to…
There are signs that the following members are coming. Any hint when?
MSP430FR4131, MSP430FR4132, MSP430FR4133 MSP430FR5887, MSP430FR58871, MSP430FR5888, MSP430FR58881, MSP430FR5889, MSP430FR58891 MSP430FR5986, MSP430FR5987, MSP430FR59871, MSP430FR5988…
So I just found something interesting! I have a PC with a clean install of win10, and I installed CCS 11.2 with the command line "--mode unattended --disable-components PF_MSP430,PF_MSP432"
And then installed the arm compiler and tried to use…
As one more update, you can find the full revision table of compatible hardware and software revisions included in the release notes:
Release-Notes-MSP-GANG.htm
See the section called "Version Matrix"
Hi SeaFesse, If you check the release notes from version 1.2.8.0, in the Version Matrix section, you'll see that the MSP-GANG HW v1.04 is only compatible with version 1.2.1.0 and higher. So this combination should not be used - please use the latest…