Part Number: MSP430G2233 I am using a simple code to switch a PIN high and LOW with a certain delay.
Clock set to 1MHz using standard clock calibration commands.
But the PWM output observed on the pin has different frequency output.
The code section is…
Part Number: MSP430G2233 Dear Experts
MSP430G2233 only supports UART boot loader.
Because the UART is used for other function, customer requires I2C boot loader.
Do you have I2C flash loader which can be used on MSP430G2233?
Thanks for your support.
Part Number: MSP430G2233 Other Parts Discussed in Thread: TRS232 , , MSP430FR2533 , MSP430FR2100 Tool/software: Code Composer Studio I haven't done any coding since my college classes five years ago. Im using a MSP430G2233 as a micro controller for 10…
Part Number: MSP430G2233 Other Parts Discussed in Thread: MSP430WARE , ENERGIA , , MSP430G2553 Tool/software: Code Composer Studio I see all the Wiki and information for GRACE, but I cannot find where to download it. I understand that it was discontinued…
Part Number: MSP430G2213 Other Parts Discussed in Thread: MSP430G2233 Used it all day yesterday, looking at the debugger and getting exactly the ADC returns I expected on the VCC/2 channel (INCH_11). Datasheet for '2213 indicates it does not contain the…
Other Parts Discussed in Thread: MSP430G2233 Hi,
Is that possible to do Timer A Capture mode and transmit UART on the same pin?
For Example the MSP430G2233 pin 1.2 Description:
Timer0_A, capture: CCI1A input, compare: Out1 output
USCI_A0 transmit data…
Other Parts Discussed in Thread: MSP430G2233 Hi,
I have msp430G2233, I have a task just not sure where to start. I have a result of (0 to 100) and I wan to send to port 1.3(ADC10CLK, VRef, VEref). So the port 1.3 will receive the sum of pulse resulting…
Hi,
I am new with this TI processor. I have a project that have 2 calibration button, high calibration and low calibration. I just want to save those value into memory after pressed calibration button and whenever the processor restarted, it will load…
It seems you can't. You can refer to this post: https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/667844/ccs-msp430g2233-can-i-still-download-grace-for-the-msp430
Hi Charles,
The EP notation stands for enhanced product. Essentially, this means there are some enhancements compared to the original MSP430G2230 such as a wider operating temperature range.
If you don't need this feature, then I would recommend taking…
