Search tips
Showing 120 results View by: Thread Post Sort by

  • MSP430G2744: What's is the ESD rate on MSP430G2744?

    TI Thinks Resolved
    Part Number: MSP430G2744 Tool/software: HI Team, could you help check the ESD MSP430G2744, we can't find data in DS.Thanks! Best Regards, Zane

  • MSP430G2744: MSP430G2744 Brownout disable register

    Part Number: MSP430G2744 Tool/software: We need disable the Brownout detection for the battery power device using MSP430G2744 process. We did not find SVSCTL register to disable this in code composer. Please advise on how to achieve this. Kind Regards…

  • MSP430G2744: The values ​​0x10F0-0x10FF in Segment A become 0xFF (Blank).

    TI Thinks Resolved
    Part Number: MSP430G2744 Other Parts Discussed in Thread: UNIFLASH Tool/software: Hi experts, We're currently investigating an issue very similar to the one in the original thread . After mounting the MSP430G2744IRHA, the "FET-Pro430" software…
    • Answered

  • MSP430G2744: MSP-GANG, Apply DCO calivration

    Resolved
    Part Number: MSP430G2744 HI, What has happened when selecting "Apply DCO calibration..." in MSP-GANG GUI tool? What calibration has been applied with this select? My customer has been facing trouble for writing flash with/without this selection. So…
    • Resolved

  • MSP430G2744: IC can't programmed

    TI Thinks Resolved
    Part Number: MSP430G2744 Hi Team, There's an issue from the customer need your help: IC can't programed, DCO calibration data in device are blank. They will not erase the data inside, but just put the product on the machine, call out the fixed program…

  • MSP430G2744: Absolute Maximum Operating Temperature

    TI Thinks Resolved
    Part Number: MSP430G2744 Hi Team, In the related thread, we discussed that it is ok to assume that the Absolute Maximum Junction Temperature is 85°C due to Absolute Maximum Junction Temperature being a little higher than Operating free-air temperature…

  • MSP430G2744: Maximum Junction Temperature

    TI Thinks Resolved
    Part Number: MSP430G2744 Hi Team, My customer has a few inquiries about junction temperature. Can you tell me what maximum junction temperature? If there is a document they can reference please link that too. Can you tell me what the heat resistance…
    • Answered

  • MSP430G2744: To be programmed before SMT is ok?

    Resolved
    Part Number: MSP430G2744 Hi TI Team, We are using MSP430G2744IRHA40 R in our project, and we want to check if we program the IC on chip before SMT, would the Firmware survive SMT reflow soldering(RoHS compliant soldering line)? Thank you for your…
    • Resolved

  • MSP430G2744: Timer TACCR

    TI Thinks Resolved
    Part Number: MSP430G2744 Hi Team, My customer has a question as below. Regarding timer A3, they plan on using clock at 300us, and the interrupt they are using is TACCR2 CCIFG. Does the timing chart in Fig. 12-3 TACCR0 CCIFG timing apply to TACCR2…
    • Answered

  • MSP430G2744: ADC10 DTC

    Resolved
    Part Number: MSP430G2744 Hi Team, My customer has a few questions regarding the ADC10. They are using the MSP430G2744IRHA40R. 1. Regarding the ADC10CTL1[15:12]INCHx, on the Family User's Guide, it says that A12-A15 are only able to be used on MSP430F22xx…
    • Resolved

Didn't find what you are looking for? Post a new question.