Part Number: MSPM0L1306-Q1 Dear Team TI,
This is Austin form Leap electronic.
We are programming company from Taiwan.
Our client has requested that we add your company's MSPM0L1306QRGERQ1 to our programmers for programming purposes. Please also…
Part Number: MSPM0G3519-Q1 Other Parts Discussed in Thread: MSPM0L1306-Q1 , , MSPM0L1306 Tool/software: Hi experts,
For MSPM0L1306-Q1 and MSPM0G3519-Q1, their VDD supports a range from 1.62V to 3.6V.
If the VDD is supplied as 1.8V:
Will the…
Part Number: MSPM0L1306-Q1 Other Parts Discussed in Thread: MSPM0L1306 Tool/software: Is the NRST pin(3) on MSPM0L1306 bidirectional? The concern I have is if MSPM0L1306 can internally pull NRST pin to ground it can create a shoot through from the IC…
Part Number: MSPM0L1306-Q1
Tool/software:
Hi Experts.
Regarding Secure Firmware Update.
MSPM0L130x and MSPM0Gx50x have bankswap function. But other M0 devices which doen't have bankswap function will not support Secure Firmware Update. Is my understanding…
Part Number: MSPM0L1306-Q1 Tool/software: I'm using M0L1306QRHBRQ1 and nominally I have a value less than VDD at the input of ADC pin (my VDD is 3.3V). However, under certain transient conditions i.e. Double VBattery the input at my ADC will get up to…
Part Number: MSPM0L1306-Q1 Tool/software: Hi,
Is there an example configuration, design or recommendation available of how to implement autoaddressing (SNPD) with MSPM0L1306-Q1 as one of multiple LIN Slaves in a system?
Part Number: MSPM0L1306-Q1 Other Parts Discussed in Thread: SYSCONFIG 用MSPM0L1306-Q1 （VSSOP 28封装）做了一个板子，现在可以开机和运行LED闪烁程序。
现在在用TI SDK包里面的 ti_msp_dl_config.c里面的热敏电阻检测的ADC代码去做，但是读ADC一直都是0，请问可以发一个ADC初始化的完整代码吗？ 比如 热敏电阻检测的ADC代码，单次转换然后去读ADC的值，就是这些的代码例子，麻烦了…
Part Number: MSPM0L1306-Q1 Other Parts Discussed in Thread: SYSCONFIG 用MSPM0L1306-Q1 （VSSOP 28封装）做了一个板子，现在可以开机和运行LED闪烁程序。
关于看门狗，请问是这样一句函数调用就可以打开了吗？还需要其他的初始化或者使能吗？
DL_ WWDT_RESTART(WWDT0);
我故意在板子初始化加了这句，然后故意在后面的程序循环中不再加 DL_WWDT_RESTART(WWDT0…
Part Number: MSPM0L1306-Q1 Tool/software: Hello,
We would like to enable baudrate synchronization for our device, using the LIN hardware enhancements of the MSPM0L1306-Q1 to measure the baudrate. In the technical ref manual of the MCU it says, 'Hardware…
