Search tips
Showing 105 results View by: Thread Post Sort by
    Answered

  • OMAP-L132: Embedded Vision Application - Object Tracking Robot

    Resolved
    Part Number: OMAP-L132 Other Parts Discussed in Thread: OMAP-L138 , AWR1642 , AWR1243 Hello! I'm a student at the University of Florida, and I'm hoping to determine which processor family would help my team realize our senior design project. My team's goal…
    • Resolved

  • RE: OMAP-L132: Device Cannot be detected in Windows10 when using USB3.0 port

    Elvin, Unfortunately OMAP-L132 is an old device and it does not support xHCI but only EHCI. As Windows 10 USB driver supports xHCI only seems it is incompatible with OMAP-L132. Probably if you find an Windows 10 USB EHCI supporting driver you will have…

  • RE: OMAP-L132: Device not detected in Windows 10 on USB3.0 port

    Hi, What is the software you run on the OMAP-L132? Is it TI Processor SDK RTOS, you ran the MSC device example? Regards, Eric

  • TMS320C6748: Bare-Metal example code for TM320C6748 uP.

    TI Thinks Resolved
    Part Number: TMS320C6748 Other Parts Discussed in Thread: OMAP-L138 , OMAP-L132 , Hi, Help me in finding Bare-metal example codes for TM320C6748 uP. I have Evaluation kit " MDSLCDK6748", but i couldn't find any Bare-metal examples to start with.…
    • Answered

  • OMAP-L132: Question regarding compatibility of patch as described in Errata Advisory 2.3.24 (Boot ECC Boot Failure)

    Resolved
    Part Number: OMAP-L132 Other Parts Discussed in Thread: OMAPL138 , OMAP-L138 Hi Forum As we have both Revision B and E (2.1 and 2.3) of the OMAP-L132 and our desire is to be able to use the same software releases for both, there is a question regarding…
    • Resolved

  • OMAP-L132: incorrect BDSL file (sprm539.zip)

    Other Parts Discussed in Thread: OMAP-L132 , OMAP-L138 Team, For OMAP-L132 sprm539.zip BSDL file (see at the link below) contains an ORCAD OLB file and not a BSDL file. http://www.ti.com/product/OMAP-L132/toolssoftware#simulationmodels On the other side…
    • Answered

  • OMAP L132 MMC Boot

    Resolved
    Other Parts Discussed in Thread: OMAP-L132 Hi. I am trying to boot OMAP-L132 from SD in order to burn the nand automatically. I did as stated in AIS boot document, i passed the u-boot through AISgen tool and successfully burnt it to sector 0 of the SD…
    • Resolved

  • RE: OMAP-L138: NOR Flash secondary bootloader

    Hi Gonzalo, This application report of Using the OMAP-L132/L138 Bootloader may be a helpful resource for you. Regards, Jianzhong

  • RE: OMAP-L138: OMAP-L138

    Hi Anurag, Please refer to application note Using the OMAP-L132/L138 Bootloader for instructions. In addition, OMAP-L13x/C674x Resources and FAQ can be very helpful as well. Regards, Jianzhong
    • Answered

  • RE: OMAP-L138: Bootloading from NAND with Bad Sectors

    Resolved
    Hi Ben, Processor-SDK for TI RTOS only supports MMCSD SBL as documented here . It doesn't have support for NAND flashing. You can still use the omap-l138 starterware which has NAND SBL . However, we don't support the starterware anymore. You can refer…

Didn't find what you are looking for? Post a new question.