Part Number: OMAP-L132 Hi
For this product, we cannot inject the program in the burning process, and it keeps indicating that the failure time out. Could you please help us confirm the cause
How to successfully burn the program
Thank you.
Part Number: OMAPL138B-EP Other Parts Discussed in Thread: OMAPL138 , OMAP-L132 , DP83640 Hello, I have modified the DTS for OMAPL138 LCDK board as out custom board has 2 nand flash chip at cs 2 and cs 3.
I have done the following but cs2 is never discovered…
Hello Myron Steinberg
Thank you for the query.
You will have to refer the below product pages.
https://www.ti.com/product/OMAP-L137
https://www.ti.com/product/OMAPL137-HT
if you do not find, you could refer to similar pages
https://www.ti.com/product…
Part Number: OMAP-L132 Other Parts Discussed in Thread: OMAP-L138 , AWR1642 , AWR1243 Hello!
I'm a student at the University of Florida, and I'm hoping to determine which processor family would help my team realize our senior design project. My team's goal…
Elvin,
Unfortunately OMAP-L132 is an old device and it does not support xHCI but only EHCI. As Windows 10 USB driver supports xHCI only seems it is incompatible with OMAP-L132. Probably if you find an Windows 10 USB EHCI supporting driver you will have…
Part Number: OMAP-L132 Other Parts Discussed in Thread: OMAP-L138 ,
Hi,
I'm having issue that the device cannot be detected by the Windows 10 when connected through USB 3.0 port. The device is configured in Full-speed USB 2.0 device.
I have tried all…
Hello Vighnesh
Regarding you query on the SPI boot mode, please refer below documents.
Using the OMAP-L132/L138 Bootloader Application Report (Rev. F)
OMAPL138/C6748 ROM Bootloader Resources and FAQ (Rev. A) (ti.com)
(11) [FAQ] OMAP-L13x/C674x Resources…
Hello Cayden,
Please refer to OMAP-L13x/C674x resources and FAQ and find the following:
Using the OMAP-L132/L138 Bootloader Application Report
OMAPL138/C6748 ROM Bootloader Resources and FAQ
Using the OMAP-L1x7 Bootloader
Using the TMS320C6748/C6746/C6742…
Part Number: OMAP-L138 Hi,
I am working on a custom project in which I need to integrate an OMAP-L138 processor to an FPGA using an EMIF port and read data from SSD through SATA, these are my basic requirements, I did go through software packages for…