Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: PCM1753-Q1 Other Parts Discussed in Thread: PCM1753 , Dear all,
my customer is interested in the evaluation of the PCM1753-Q1, he is fine even wiht the evm of the PCM1753.
In the TI.com there the documentation of the EVM of the PCM1753/4/5…
Part Number: PCM1754-Q1 Other Parts Discussed in Thread: PCM1753-Q1 , PCM1754 , PCM1753 , Hi Expert,
We are getting a problem with this hardware control IC and getting too much distortion over audio because of format mismatch, we have pulled down the FMT…
Part Number: DS90UB949-Q1 Other Parts Discussed in Thread: PCM1753 Hello TI team, I have been working with DS90UB949-Q1 and an audio DAC PCM1753. The application is such that, the user's laptop is connected to the serializer using an HDMI connection and…
Part Number: PCM1754-Q1 Other Parts Discussed in Thread: PCM1754 , PCM1753-Q1 The problem is that if mute pins are turned off, the bottom noise will be there. No matter whether IIS is configured or not, the noise will be slightly reduced by short circuiting…
When using 4-wire mode, the device will still try to automatically detect the sample rate. This will usually result in the device configuring itself for a 16ksps or 32ksps configuration, but it is not guaranteed. In both cases, the charge pump will not…
Part Number: PCM1753 Other Parts Discussed in Thread: , PCM1754 Hi,
According to PCM1753 data sheet, it seems that PCM1753 can be worked with the default settings normally even if the internal registers aren't access using the ML, MC and MD pins, but…
Part Number: PCM1754-Q1 Other Parts Discussed in Thread: PCM1755 , PCM1754 , PCM1753 Hello,
The speed of MUTE for PCM1753 and PCM1755 is explained in the datasheet. But how about PCM1754? How long does it take from normal audio output level to infinite…
Hi Fery,
This is strange. Let me check with our systems team - but for the time being it should be assumed that the absolute max value is correct, and the device should not be operated above 85°C. The PCM1753-Q1 is qualified to a higher temperature…
Part Number: PCM1754-Q1 Other Parts Discussed in Thread: PCM1753 Dear Sirs,
My customer asked us about pin capacitance specification for PCM1753 and PAM1754.
1.Does the PCM1753 / 54 have SPECification of the output load capacitance of the VCOM pin?
So…
Part Number: PCM5102-Q1 Other Parts Discussed in Thread: PCM1753-Q1 , PCM1789-Q1 Dear all,
one of my AA, would use the sample rate fs=20.5KHz, but this is not allowed in neither 3-wire and 4-wire mode.
Is there any other Automotive Audio DAC which supports…
