Hi, Fabio.
Besides the hardware configuration, TUSB320 also needs to be writing/reading by I2C. You can download PMP40496 Firmware which under the reference design page http://www.ti.com/tool/PMP40496 , search TUSB320 folder to find the configuration…
Part Number: BQ28Z620 Other Parts Discussed in Thread: BQ25883 , TUSB320 , PMP40496 Hi, We're working on an implementation very similar to the PMP40496. BQ28Z620 + BQ25883 + TUSB320. We had issues with our first boot with the BQ28Z620DRZR. We had to short…
Part Number: BQ25883 Other Parts Discussed in Thread: BQ25895 , , PMP40496 Tool/software: Hello,
I’m developing a portable device based on the Raspberry Pi Compute Module 5 (CM5) . The system is powered via battery and external supply , and requires…
Part Number: BQ25883 Other Parts Discussed in Thread: PMP40496 Please send me the Gerber layout Files shown on Page 75 of SLUSDL3A –FEBRUARY 2019–REVISED APRIL 2019. It does not have a schematic to match the legend.
User Guide SLUUC10–February 2019…
Eduardo,
In addition to Nick's comments, please have a look at this reference design:
It is very similar to your application and may provide some clarity.
Best Regards,
Ricardo
Part Number: TUSB320LAI Other Parts Discussed in Thread: PMP40496 , , BQ25883 , TUSB320 Hello everyone,
We have designed and prototyping a board similar to PMP40496 2-cell boost charge system reference design with 5-V USB.
I have a doubt about this…
Good Morning Dimitri,
thank you so much for your explanation!
I now understand the problem. It was caused by a pull-up resistor to 3.3V on the OTG_ID line which charged OTG_VBUS by forward conduction on the diode array, as you clearly explained. …
Part Number: BQ28Z610-R1 Other Parts Discussed in Thread: BQSTUDIO , , BQ25883 , BQ28Z610 , TUSB320 The parts mentioned above appear to provide a nice solution for an embedded battery pack and charger when used together
as indicated by Test Report:…
Part Number: BQ28Z610 Other Parts Discussed in Thread: PMP40496 , BQ24725A , , BQSTUDIO , GPCCHEM Dear TI team,
Together with my team I been working on a device that integrate some of components from your portfolio. We designed consumer device that…
