Part Number: PROCESSOR-SDK-AM65X Currently there are EVMs equipped with DDR4, does it enable DDR4 function MPSM (Maximum power savings mode)?
is any SDK support it?
Part Number: PROCESSOR-SDK-AM65X
TI is no longer providing design support for the AM65x RTOS SDK after December 31, 2023. We continue to provide design support for the AM65x MCU+ SDK (FreeRTOS & bare metal) , and the AM65x Linux SDK .
You can still…
Part Number: PROCESSOR-SDK-AM65X Hi,
I'd like to boot Linux on the AM65x using both UART and the eMMC. I used this post to boot U-Boot via UART: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1021784/faq-processor-sdk-am65x…
Part Number: PROCESSOR-SDK-AM65X Other Parts Discussed in Thread: PRU-ICSS-INDUSTRIAL-SW , PROFIBUS Hi TI,
I just have a quick clarification regarding the AM65x, as I'm in the planning stages of an industrial project for which the AM65x appears to have…
Part Number: PROCESSOR-SDK-AM65X Developed using PROCESSOR-SDK-RTOS-AM65X ver07.03.00.09. NDK is using NDK 3.80.00.19.
I want ethernet ports eth0 and eth2 (ICSSG0 and ICSSG1) to communicate on the same subnet. For example, I want to set eth0 to 192.168…
Part Number: PROCESSOR-SDK-AM65X
Hi,
I wonder if there is any update on the issue: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1295535/processor-sdk-am65x-support-10mbps-on-pru-ethernet-interface-with-ti-sdk-7-0-1/ ?
The post…
Part Number: PROCESSOR-SDK-AM65X Hello.
Developed using PROCESSOR-SDK-RTOS-AM65X ver07.03.00.09.
pdk_am65xx_07_03_00_54\packages\ti\transport\ndk\nimu\example\src\main_am65xx.c
I created an application that runs on multiple Ethernet ports using the above…
Hi Laxman,
Thanks for the new details. It is much cleaner!
Laxman B said: In the past, I managed to get UDC binding working with the older version by simply loading the g_ether module. However, with the new version and the ConfigFS interface, I'm seeing…
Hello,
Huynh Nguyen said: The question is for using IO expander alone. Is there API available at boot level for user to use to access I2C to change the boot mode before or after new application
Here are some reference that may be of help for you to try…
Part Number: PROCESSOR-SDK-J721S2 Tool/software: Hello, When both the main domain and MCU domain are running properly, can I shut down only the main domain and run the MCU domain separately? If so, how?
thanks.