Part Number: PROCESSOR-SDK-J721E Tool/software: Hi,
I cannot set the date and time in J721E EVM common board after power cycle. When I set the date and time in EVM board, it will set at first. But when power cycle occur, the date and time will be the…
Part Number: PROCESSOR-SDK-J721E
Tool/software:
Hi,
For making emmc device to boot on power on, I followed the steps that mentioned in the SDK document given below,
https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-jacinto7/10_01_00_04…
Hi,
wang zhenkai said: i have disabled all ENABLE_MAC_ONLY_PORTS ,in concerto.mak and main.c ,but question still have
step1.
step3.
You should not disable all the Ports. You are supposed to disable only MAC Ports mapped to GESI Card which…
Part Number: PROCESSOR-SDK-J721E Tool/software: Hello,
We are working to support a CAN device, a radar device, on j721e EVM.
When we used can utils with classic CAN mode, it works fine.
For example, "ip link set mcu_mcan1 type can bitrate 1000000…
Part Number: PROCESSOR-SDK-J721E Tool/software: Hi,
I just followed processor sdk version 8_06_01 for uart verification. I tried cat command and echo command, then I got the output only in ttyS2. In other ttyS1, ttyS3 and ttyS6 there is no output. I…
Part Number: PROCESSOR-SDK-J721E Tool/software: Hi,
Can you please tell me Is there any way to run a custom GUI in J721e common processor board using any platform like Qt or Python.
Hello,
xiao xiao said: #define SERVICE_PING "ti.ipc4.ping-pong" #define ENDPT_PING 13U #define SERVICE_CHRDEV "rpmsg_chrdev" #define ENDPT_CHRDEV 14U #define SERVICE_FCT "rpmsg_fct"
You did not mention the new end point here .
xiao xiao said: Ipc_TestParams…
Part Number: PROCESSOR-SDK-J721E Tool/software: When attempting to run the AWB plugin in the DCC Tuning Tool, the following error message is displayed. If anyone is aware of a solution, please kindly advise. Note that the recommended PC is Windows 10;…
Part Number: PROCESSOR-SDK-J721E Other Parts Discussed in Thread: UNIFLASH , AM6442 Tool/software: Hello team, I am currently using IS25LP128F as the boot flash on a custom board, but the j721e boot failed.Is there any requirement for the flash when using…
Part Number: PROCESSOR-SDK-J721E Other Parts Discussed in Thread: TDA4VM Tool/software: Hello,
I am wondered about how to enter low power mode on j721e.
1. I have tried "systemctl suspend". And it just returned a prompt and no response.
When I tried…
