Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: PROCESSOR-SDK-J721S2 Tool/software: To Steven Werner or other TI support,
Hi, I am trying to run the Vision Apps and following the Build tutorial for Linux + RTOS. How many threads should I build with?
Looking forward to hearing back. …
Part Number: PROCESSOR-SDK-J721S2
Tool/software:
Hi Ti,
For now,When we set the resolution to 1920x720x60Hz, the DSI works fine, but when we try to set the resolution to 3840 x720x30Hz , no data output is measured on the DSI bus.
When 1920x720x60Hz,we…
Part Number: PROCESSOR-SDK-J721S2 Other Parts Discussed in Thread: CSD Tool/software: Hi Ti,
We have a PCBA that won't boot from EMMC, but boots from SD no problem.
The error log is as below. What is the possible problem?
U-Boot SPL 2021.01 (Sep…
Part Number: PROCESSOR-SDK-J721S2 Tool/software: Dear TI,
About the boot mode of J721S2 TDA4AL,
Can SW8(BOOTMODE) and SW9(MCU_BOOTMODE) config to difference mode ?
Like
SW8 : 1000 0010 (SD Boot) SW9 : 0111 0000 (No Boot Mode)
Thank you very much
Part Number: PROCESSOR-SDK-J721S2 Tool/software: HI TI,
How to modify dphy_TxByteClkHS_cl_clk and vbus_clk_clk in csitx rtos driver? we used pdk_j721s2_10_00_00_27
For now,we connected video processor after the J721S2 CSITX output and to Converted CSI …
Part Number: PROCESSOR-SDK-J721S2 Other Parts Discussed in Thread: TDA4VEN-Q1 Tool/software: Hi,
We use J721S2 and PSDK8.4,
We can enable 1st DSI instance. but can not enable 2nd DSI instance.
My former colleagues had asked : https://e2e.ti.com/support…
Part Number: PROCESSOR-SDK-J721S2 Tool/software: Hi
We are using J721s2 processor sdk, our deserializer is max96714 and slave address is 0x50 and deserializer is populated with the board, and i2c bus is 1 when we check the i2c using i2cdetect -y 1 we…
Part Number: PROCESSOR-SDK-J721S2 Tool/software: Where can I get an intrinsic list for TDA4AL c7x DSP optimization?. I can able to get a basic vector type list but it will be more helpful when I get a all of the intrinsic instruction list.
