Part Number: MAX3232E-Q1 Other Parts Discussed in Thread: LSF0204 , REF3012 , LSF-EVM Hi team,
We would like to have IBIS Models for the foll: ICs. It is not available in ti.com
1. MAX3232E-Q1
2. LSF0204
3. REF3012
Part Number: ADS1262 Other Parts Discussed in Thread: REF3012 , INA125 , ADS1235 , OPA388 , ADS1261 Hello people!
With ADS1262 PGA set on Gain 32, the full scale is 78mV, so my load cell -with its 20mV max output- isn't able to exploit ADS capabilities.…
Part Number: REF3012 Other Parts Discussed in Thread: INA333 I will use REF3012 to provide a constant voltage (500mV) input to INA333 (VIN-). The data sheet for REF30xx ( www.ti.com/.../ref3012.pdf) showed that, in Figure 29, a 0.47uF by-pass capacitor…
Part Number: REF3012 Please advise if REF3012 can operate from a 1.8V supply? Most supplies have tolerance of +/- 3% which means it could be slightly lower than 1.8V. Is that okay? Or does the supply have to be above 1.8V always?
Part Number: REF3012 Other Parts Discussed in Thread: REF3025 , About Datasheet of REF30xx series, 7.6 Typical Characteristics are described only REF3025 specification.
Is there REF3012 Characteristics like the REF3025? （Expect Vout specification, is these…
The TLV431A and TLVH431A have 1 %; the TLV431B, 0.5 %. Prices and availability depend on the package; which one do you need?
(Series references like the REF3012 are more expensive.)
Other Parts Discussed in Thread: REF3012 , REF3112 , REF3312 , REF3212 Vref is ref3012, i need 1.25V output.
when Vin is floating or 0V, ref3012 outputs 1.25V.
when Vin is 3.3V, 5V or 15V,ref3012 output 1.32V.
i want to know whether i use ref3012 right. if…
Other Parts Discussed in Thread: REF3012 Hello,
Does the REF3012 support a 1.71V input at output loads between 50-100uA?
I see conflicting notes in the datasheet that say:
Note 1, Minimum supply voltage for REF3012 is 1.8V, but then a little above that…
