Part Number: RF430FRL152H
Tool/software:
Dear Sir,
We would like to know the ADC error.
0.6V connect to the ADC pin, but the data form the SD14mem is between 10973 and 10964
We set 16 bit accuracy.
SD14CTL1 = (SD14RATE2 + SD14RATE1); // 16-bit
1. Why…
Hi Chris,
I run of ideas as to how to recover your board. I hope you can continue your developments with other boards you have. I will continue to do some searches and if I find a solution I will post back here.
Hi Chris,
I'm trying to acquire the hardware and debug tool in order to do the testing myself. DIVS_5 is a supported divisor value according to the TRM but I don't know the reason for the crashing. I just wanted to know if you have the same issue for…
Part Number: RF430FRL152H Tool/software: Dear Sir,
We would like to enable 16bit ADC: SD14RATE2 + SD14RATE1
But, SD14MEM0 is 0~13 (14bit).
How to read 16bit ADC resolution?
BR,
Chris
Part Number: RF430FRL152H Tool/software: Hello,
I am curious if anyone knows the maximum power that can be supplied by the power supply when powered passively off of the 13.56-MHz H-Field. I know the RF430FRL152H combined GPIOs are limited to 500uA which…
Hi Nick,
Nick Palladino said: I would like to get a programmer / debugger that works with the RF430FRL152H so I can investigate further
Please refer to Frequently asked questions for RF430FRL15xH devices (Rev. C) . You can use MSP-FET debug probe to…
Part Number: CCSTUDIO Other Parts Discussed in Thread: RF430FRL152H Tool/software: I tried to program my RF430FRL152H evm on CCS, but the device cannot be found at the start page. Could you help?
Part Number: RF430FRL152H Hello
we are using the RF430RFL152H as a NFC battery free ADC
our first version was based on the evaluation board with 33mm diameter so we used the same antenna design
we are designing a new iteration of our design with 50mm…
Hi Chris,
Very glad your problem is resolved. I have worked with multiple MCUs in the past. It is always a requirement to wait for the main oscillator to stabilize before using it. You can check with your crystal oscillator what is the startup time of…
Part Number: RF430FRL152H Hi.. I have a problem in writing some information (text, url etc) to the NFC tag, which is embedded with RF430FRL152H chip. When I used other chip i.e. chip from NXP Semiconductor, I can write down some info in the tag. I am…
