Part Number: TSW14J10EVM
I want to use the TSW14J10EVM as intermediary card between the ADC12DJ3200EVM and my KU115 based FPGA platform (not from XIlinx).
I found in the TSW14J10EVM a setup that does not require FPGA jtag connection between FPGA board…
Hello,
Can you provide more details on your rootfs? Can you use TI SDK rootfs or use that as a reference? Are you using TI kernel as is? First thing to check would be the kernel configuration. Can you try and use the same kernel config as the one used…
Hello Jianzhong
Could you provide guideline how to debug and resolve this issue?
To make all entities have the same perperties, we try below
1. On our decoder driver we set
_mbus_formats = MEDIA_BUS_FMT_UYVY8_1X16
_OUT_WIDTH = _OUT_HEIGHT
_FRAMERATE_DEFAULT…
Part Number: TDA4VEN-Q1 Tool/software: Hi, experts
On the TDA4VEN we used your serial deserialiser solution for getting data from the camera, the data flow is as follows:
OVX1F(x4) --> DS90UB933 --> DS90UB960 --> TDA4VEN(CSIRX).
I've successfully…
Hi Jianzhong,
I have updated SDK and now The OV5647 show: root@am62axx-evm:/opt/edgeai-gst-apps# v4l2-ctl --list-devices j721e-csi2rx (platform:30102000.ticsi2rx): /dev/video1 /dev/video2 /dev/video3 /dev/video4 /dev/video5 /dev/video6 /dev/media0
…
Hi,
As stated, all interfaces rely on DHCP, there is no further manipulation on the interfaces from the default sdk config apart from the ones listed.
Indeed, the br0 is not getting an IP address.
Tryed to setup the bridge with interfaces down, yields…
Part Number: TDA4VH-Q1 Tool/software: Hi,
I am currently working on the audio driver bring-up activity for the TDA4VH-Q1 EVM board. While configuring the audio driver, I encountered the following probe errors (Yocto):
[ 13.051645] platform 6000000.usb…
Hi, Nikhil
Yes, I want to stream the two in parallel.
But when I add the following in uEnv.txt:
name_overlays=k3-j721e-edgeai-apps.dtbo k3-j721e-sk-fusion.dtbo k3-fpdlink-imx390-rcm-0-0.dtbo k3-fpdlink-imx390-rcm-0-1.dtbo
There areno video device nodes …
Meet,
Thank you for your help and patience. I had already read and applied these instructions in your link (that is not update for AM64), but in the device tree there is an additional action to do that I share below for an another reader. Now it's works…
