Part Number: SCANSTA101 In the datasheet, it states that "Texas Instruments provides C-language source code which can be included in the embedded system software..."
Where can I find this code? Thanks.
Part Number: SCANSTA101 Hi,
I am looking into the Scansta 101 datasheet, and got curious about whether it is possible to directly control dot1_SM pins (such as TMS_SM or TCK_SM) via input dot1 pins (like TMS or TDI), which will be connected to the…
Hi Praveen,
Unfortunately we don't have one for Linux.
Dennis
P.S. Please mark this post as answered via the Verify Answer button below if you think it answers your question. Thanks!
Other Parts Discussed in Thread: SCANSTA111 , SCANSTA101 Hi Team,
One of our customers will like to use SCANSTA101 and SCANSTA111 products and control them with one TIVA MCU ( TM4C123 ). This designer guide gives a pretty good overview of how to connect…
Part Number: SCANSTA112 Other Parts Discussed in Thread: SCANSTA101 , Hi Team,
My customer had a project the HW adopt SCANSTA101 and SCANSTA112 to implement JTAG chain for the CPLD program.
SCANSTA101 will link with main CPU be JTAG source. They…
Allan
I want to provide a forewarning here that the support for JTAG devices is limited, as the original National Semiconductor group who supported this product no longer exists, thus limiting our in-depth knowledge about this device.
SCANSTA112 would…
Mikhail
Please refer to the hardware design guide and app note: http://www.ti.com/lit/an/snla055h/snla055h.pdf .
7317.SCANSTA101_Design_Guide2010.pdf
Software tool for SCANSTA112 is at https://www.ti.com/product/SCANSTA112/toolssoftware .
Thanks…
Kay
SCANSTA112 would be the part to support this application.
Please refer to the hardware design guide and app note: http://www.ti.com/lit/an/snla055h/snla055h.pdf .
7317.SCANSTA101_Design_Guide2010.pdf
Thanks
David
Hello Yunus,
Sorry for the late reply. Unfortunately, I am not sure why this is failing. Have they looked at the documents in the product folder (Reference Guide, etc.)? There is also another useful document that may be helpful (please see attached…
Hi Patrick,
Yes, the SCANSTA112 devices can be daisy-chained. If they are daisy-chained and connected to the same backplane, it is usually recommended to operate in Scanbridge mode, as the user will typically need a way to access/address each SCANSTA112…
