Hi,
Unfortunately we don't do hardware reviews on this platform.
Please submit your request at the following URL:
https://www.ti.com/tool/SIMPLELINK-2-4GHZ-DESIGN-REVIEWS
Thank you,
Rafael
Part Number: UCC28950 Other Parts Discussed in Thread: UCC39002 I am currently designing a 1kW isolated DC-DC converter (96V input to 13.5V output) using a Phase-Shifted Full Bridge (PSFB) topology.
The system is intended to use two 500W modules in…
Part Number: BQ28Z610 Hi,
We are currently developing a battery management system for a 2-cell LiPo battery (7.4V, 3300mAh), which incorporates a B3B-XH-AM connector for voltage sensing and cell balancing.
We would greatly appreciate your review…
Colin,
1. All GPIO have wakeup and interrupt capabilities.
2. It is not necessary for the device to function but depending on the application requirements it may be useful.
3. The JTAG pins can be routed to a connector for debug purposes. VDDR…
Hi Yasar,
Please submit your schematic for review through our official process here: https://www.ti.com/tool/SIMPLELINK-2-4GHZ-DESIGN-REVIEWS
and we'll assign an engineer to thoroughly review the design.
Best regards,
Bun
Part Number: BQ24133 Tool/software: I have designed 2-Cell charging System based on BQ24133. Its bit complex in design. Can you please review the schematic and let me know if some changes or adjustments are needed. Thanks
System is designed for 12…
You can submit your design to SIMPLELINK-2-4GHZ-DESIGN-REVIEWS for further review. Have you replicated the issue with a TI EVM? I have no concerns with implementing a 10 nF capacitor on an unused IO if it resolves the issue for your system.
Regards…
Part Number: TPS2121 Other Parts Discussed in Thread: TPS2120 There are 2 conditions: 1) Device switches to IN2 when IN1 drops below 3V 2) Manually switch to IN2 even when IN1 stays at 12V
From my understanding, this design for automatic switchover…
Part Number: TLVM14406 Other Parts Discussed in Thread: TPSM64406
Hi,
I would kindly request a design review of my three applications using the TLVM14406.
I am using it as:
Dual 3.3 V / 5 V, max. 3 A
Single 4 V, max. 5 A
Single 8 V, max…
