Hello Giannis,
I'm sorry it has taken so long for you to get a reply.
From our NDK expert:
Yes, you can create a dual interface set up with one IF running on the serial port (PPP connection) and another over standard Ethernet. I have done this for…
Hi Sir
We used DM8148 platform with thin-client RC4 for development and met some problems.
First, we download below RDP source code and integrate it into DM8148 SDK.
Version 1.1.0~beta1+git20130629
https://packages.debian.org/search?suite=default§ion…
Part Number: LAUNCHXL-CC2640R2
Tool/software: Code Composer Studio
Trying to compile ble5_host_test_cc2649r2lp_app for a new board. Following this guide: http://software-dl.ti.com/simplelink/esd/simplelink_cc2640r2_sdk/2.40.00.32/exports/docs/ble5stack…
Other Parts Discussed in Thread: TVP5158 Hi,
I am working at :
HW: DM8168 + vs daughter card.
SDK: dvrrdk 2.0.0.23
sorry, i am not familiar with sdk. I want connect links as as follows, but nothing display and stored.
my questions: 1…
Hi, Rahul Prabhu. First of all thank you for your suggestion. I re-install the ccs6.1.3 and processor_sdk_rtos_c667x_3_01_00_06, according to the manual to run the following commands "setupenv.bat gmake demo_clean gmake demo" compiled through. But I have…
Part Number: PROCESSOR-SDK-AM335X Other Parts Discussed in Thread: AM3358 , TUSB2036
Hi,
I have compiled the linux kernel from the TI SDK and it is running om my custom board using an AM3358 with DDR3 1GB. The OS is booting fine and seems to work…
Part Number: PROCESSOR-SDK-AM335X
Tool/software: Linux
Hi all,
I am working on a project where we are using a custom board that is based on the BeagleBone Black to boot. The custom board has removed most of the peripherals but left the most main…
Hello Miroslav
Currently ,It is OK to use
Version:
Uboot:2013:01.01 , Kernel 3.2 , TI SDK 6.0
uenv.txt
bootargs=console=ttyO0,115200n8 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81000000,64M bootcmd=mmc rescan; fatload mmc 0 $loadaddr uImage;…
Other Parts Discussed in Thread: OMAP-L138 , DA8XX , OMAP-L137 Hello!
We have developed our customer board based on OMAP-L138. In the first step our device electrical schema is based on SOM and BaseBoard from LogicPD. And now I try to start our device…
Hi,
You can look at the schematics and assembly docs under SDK installation (./docs/hardware).
Attached for reference.
CC3200-LAUNCHXL_ASSY_FAB_Rev4p1.pdf
CC3200-LAUNCHXL_SCH_Rev4p1-a.pdf
Shlomi
