Part Number: SK-AM62-SIP Tool/software: I recently got an evaluation kit from TI, SK-AM62-SIP. I'm trying to get it to boot following the quick start guide. It is unable to boot. There are no serial logs from the J15 microusb port. This are the sd…
Part Number: SK-AM62 Tool/software: Hi Team,
EVSIS, my customer asked me if it is possible to connect SK-AM62-SIP starter kit with MCCI Model 4922 Test Controller Kit.
My customer asked this question with below links.
SK AM62 E2E - https://e2e.ti.com/support…
Part Number: SK-AM62-SIP
Hi TI!!!
I want to do a simpler design than the SK-AM62-SIP and I have the following questions?
I see that VDDSHV_SDIO (MCU side) it is powered through a regulator that is configured for 3.3V or 1.8V. However, the SD is powered…
Hi Board designers,
The Updated schematics along with the list of files listed below have been uploaded on TI.com
https://www.ti.com/tool/SK-AM62-SIP
https://www.ti.com/lit/zip/sprr482
Please provide your feedback for improvement.
List of files for d…
Part Number: SK-AM62-LP Other Parts Discussed in Thread: UNIFLASH Tool/software: Hi Team,
I am using uart_uniflash.py file for flashing the u-boot images to OSPI Nand flash and these are my configuration file as show below.
and I'm downloaded, using…
Part Number: SK-AM62-LP Other Parts Discussed in Thread: AM62A7 Tool/software: Hello Team
I have one SK AM62LP evm board with ID ASSY PROC124E2A where I want to use one of the expansion pin as GPIO , where I can connect LED and test . Here I am trying…
Part Number: SK-AM62-LP Tool/software: Hi Team,
I want to change the emmc partition like below
=> mmc part Partition Map for MMC device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 32768 b23a7979-01 06 Boot 2 34816 524288…
Hello,
Maleesha Sudara said: Also flashed the Debian OS image to eMMC:
If you have flashed the WIC image then it is mostly the case that the rootfs is in the 2nd partition. In that case, you would need to use the following commands to boot Linux Kernel…
Hello,
The tiny filesystem is meant to be used as an initramfs. You would need to use the base or default filesystem according to your requirements. In any case, you can not use the UART_UNIFLASH for flashing any of them. You would have to flash the rootfs…
Dazong Chen said: Just please update us on if dfu usb boot then jump to baremetal application is doable, and how long the download time will take
You can do that with the SDK out of the box.
1) Build the U-Boot chain using the related defconfigs as per…
