Part Number: SK-AM62-SIP Tool/software: I recently got an evaluation kit from TI, SK-AM62-SIP. I'm trying to get it to boot following the quick start guide. It is unable to boot. There are no serial logs from the J15 microusb port. This are the sd…
Part Number: SK-AM62 Tool/software: Hi Team,
EVSIS, my customer asked me if it is possible to connect SK-AM62-SIP starter kit with MCCI Model 4922 Test Controller Kit.
My customer asked this question with below links.
SK AM62 E2E - https://e2e.ti.com/support…
Part Number: SK-AM62-SIP
Hi TI!!!
I want to do a simpler design than the SK-AM62-SIP and I have the following questions?
I see that VDDSHV_SDIO (MCU side) it is powered through a regulator that is configured for 3.3V or 1.8V. However, the SD is powered…
Hi Board designers,
The Updated schematics along with the list of files listed below have been uploaded on TI.com
https://www.ti.com/tool/SK-AM62-SIP
https://www.ti.com/lit/zip/sprr482
Please provide your feedback for improvement.
List of files for d…
Part Number: SK-AM62-LP
Tool/software:
Dear Team,
I have a very urgent PoC coming up in which I need to show case dual display on SK-AM62-LP
I am trying to bring up dual display on SK-AM62-LP. Primary display on LVDS and secondary display on HDMI.
…
Part Number: SK-AM62 Other Parts Discussed in Thread: SYSCONFIG Tool/software: Hi Team,
Regarding mcu_plus_sdk_am62x_09_02_00_38
I am using UART from Main domain, but I need to configure UART from main domain in Interrupt mode.
Please let me know necessory…
Part Number: SK-AM62-SIP
Hello.
I have a question about the SK-AM62-SIP. Looking at the PCB picture, there is a jump wire connected.
The schematic of "SPRR482 — SK-AM62-SIP Design Files Package" doesn't seem to be modified, is that correct?…
Part Number: SK-AM62 Tool/software: Hi TI-Team,
I am working with the SK-AM62 EVM running Linux (Kernel version: 6.1.80) and have connected a USB Bluetooth adapter (V5.0) to the board. I am able to pair the EVM with my PC, but I am facing issues with…
Hi Manu,
Manu H S said: This above already present in am62-lp-sk.dts for supporting NAND flash, I want to support NOR flash, Is it both NAND and NOR supportable? If yes then, do i need to add like &ospi0 node for NAND flash or &ospi1 for NOR flash or…