Part Number: SK-AM62B-P1 Tool/software: I'm on a windows machine and I've plugged in the SK-AM62B-P1 via micro usb(via j15) and LD13 flashes briefly then turns off. Then when I plug it in via usb-c (via j13) to power it, it still does not appear in my…
Part Number: SK-AM62B-P1 Tool/software: Hi Expert,
Customer wants to test the READ/WRITE function of SPI0 on SK-AM62B-P1
Should I choose k3-am62-lp-sk.dts or k3-am625-sk.dtb?
How do I add SPI0 to the device tree?
Can I see SPI related information…
Part Number: SK-AM62B-P1 Other Parts Discussed in Thread: CC3301 Tool/software: Which kernel driver is used for the CC3301's PCIe on this board?.
Alternatively, which Kconfig configuration macro is it
Part Number: AM623 Other Parts Discussed in Thread: SK-AM62B-P1 Tool/software: Hi
The original McASP1 used by SK-AM62B-P1 is located in the following figure.
But we want to use other pinouts to test McASP1. Currently, it is expected that the pins…
Part Number: SK-AM62B-P1 Other Parts Discussed in Thread: BEAGL-PLAY-SBC , Tool/software: Hi AM62x Champ !
My customer bought SK-AM62B-P1 EVK this week. Then they're going to Yocto Build with latest SDK release.
What machine value should I use for…
Part Number: SK-AM62B-P1 Tool/software: Hi TI Expert,
We try to using our EVB SK-AM62B-P1, we follow the steps of AM62x Starter Kit EVM Quick Start Guide to create the SD card.
The SDK used is in the red box as shown below.
Boot's dip switch is…
Part Number: SK-AM62B-P1 Tool/software: Hellow Ti experts, I’m currently designing a custom single-board computer (SBC) based on the SK-AM62B-P1 EVM as a reference. While working on the schematic, I’ve encountered some confusion regarding the SoC UART1…
Part Number: SK-AM62 Tool/software: Hi team,
I’m working with the SK AM62x on Ubuntu 22.04 and have downloaded the correct package (mcu_sdk-am62x) for my board. Here’s what I’ve done so far:
I successfully read UART characters.
I transferred the…
Hello Sai Kiran,
What is the current status of this thread?
Sai Kiran Y said: When no CAN transceiver is connected, mcu_mcan0_tx is at 3.3V and mcu_mcan0_rx is at 1.1V.
Without the transceiver, the CAN module will immediately flag a bit-error and…
