Search tips
Showing 56 results View by: Thread Post Sort by

  • SM320F28335-HT: SM320F28335-HT

    Part Number: SM320F28335-HT We have two different revision boards of a design with no changes in the dsp section except for the oscillator. The old board with a 20 MHz oscillator boots just fine after a power reset but the new board with the 30 MHz oscillator…

  • SM320F28335-HT: Error on new boards

    Part Number: SM320F28335-HT We just received two more assembled boards from our assembly house (the first ones did not show this problem). Both pass the JTAG scan passes just fine but when we try to load the program we get an error shown below (image…
    • Answered

  • SM320F28335-HT: SM320F28335 Matlab DO-178C

    Resolved
    Part Number: SM320F28335-HT Hi everyone We are going to use SM320F28335 for DC-DC (phase-shifted full-bridge topology). But our device has to certify by DO-178C. Could we do it if we use Matlab toolboxes without C/C++?
    • Resolved

  • SM320F28335-HT: Bare die VSS pads around clock/osc pads

    TI Thinks Resolved
    Part Number: SM320F28335-HT Hello, I am using the known good die version of the SM320F28335-HT DSP. I have a question regarding the VSS pads numbered 148, 151, and 153 in the datasheet. Are these pads connected internally on the chip, and is it possible…

  • SM320F28335-HT: Where to get the controlSUITE HFI/IPD library for SM320F28335 for PMSM motor control.

    TI Thinks Resolved
    Part Number: SM320F28335-HT Other Parts Discussed in Thread: CONTROLSUITE , hi I am the disty FAE in charge of Ti product line. My customer is using TI’s controlSUITE libraries for PMSM motor control. They plan to use HFI/IPD library with controlSUITE…

  • SM320F28335-HT: ADC external biasing components

    TI Thinks Resolved
    Part Number: SM320F28335-HT Hello, I have a question regarding the 2.2uF caps that the data sheet says to add on the ADCREFx pins. What effect would using a 1uF cap on these pins have on the ADC readings/functionality, specifically when operating at 200…

  • SM320F28335-HT: CPU Supply Voltage Requirements

    TI Thinks Resolved
    Part Number: SM320F28335-HT Hello, Could someone please clarify for me what voltage needs to be used for the VDD supply? The SM320F28335-HT datasheet calls for 1.9V, but the TMS320F2833F datasheet calls for 1.9V @ 150MHz and 1.8V @ 100MHz. I wanted to…
    • Answered

  • SM320F28335-HT: maximum temperature

    Resolved
    Part Number: SM320F28335-HT Hi There i have an application where I need a processor to run for 20-30h hours at 230 degrees can I run this part hotter than the datasheet value of 210 but for a reduced life? Is there a cliff edge point where it stops working…
    • Resolved

  • SM320F28335-HT: SEU Analysis Question

    TI Thinks Resolved
    Part Number: SM320F28335-HT Do you have any available SEU analysis available for SM320F28335, inparticular the configuration and control registers, is there difference from normal SRAM? Thank you. Ken Jewell.
    • Answered

  • SM320F28335-HT: Possibility of F28335 flash library with EABI support

    Resolved
    Part Number: SM320F28335-HT Other Parts Discussed in Thread: C2000WARE Hi, I'm porting a bootloader application to a SM320F28335-HT. I would like to use #pragma LOCATION as described in "TMS320C28x Optimizing C/C++ Compiler v18.12.0.LTS"/spru514r.pdf…
    • Resolved

Didn't find what you are looking for? Post a new question.