Part Number: SN65C1167E Hi Team,
Please help me answer the follow question from my customer, thank you so much.
Q1.If 12pin (DE) of SN65C1167EPW is Open, how does SN65C1167EPW work? (Does the Drive circuit become effective?)
Q2.If the Device connected…
Part Number: SN65C1167E Please add this to Liu Yang's question and let me know.
Looking at the DE pin waveform on the PCB board, The level is maintained at around 0.4 V, but it rises to around 1.1 V instantaneously. (Width of 5us to 15us)
How many microseconds…
1. The SN75ALS160N is in the list, but the SN75ALS160DW(R) is not. This appears to be the same error; all packages will be EOL'd.
2. The SN65C1167E is an RS-422 transceiver. This is electrically not compatible with GPIB. There is no replacement for…
Part Number: AM26C31M Other Parts Discussed in Thread: AM26C32 , UCC21755-Q1 , SN65C1167E , pls help me to to finalize the logic .pls reffer attached picture.basic our requirement is to avoid noise and reproduce controller card output 3.3V PWM at end output…
Hi Kannan,
The main difference is that the SN65C1167E has improved ESD performance - the "E" version has specs for CDM, HBM, IEC 61000-4-2 (air gap and contact) - this information isn't provided with the non "E" version.
Besides…
Other Parts Discussed in Thread: SN65C1167E Hello,
Our customer uses SN65C1167E. Since they must connect the SN65C1167E to some components, they can't manage Impedance...
Please see the attached waveform as result of this impedance mismatching.
4237…
Other Parts Discussed in Thread: SN65C1167E Hello,
Our customer use SN65C1167E.
In their system, Internal 5V and external 5V.
Vcc=internal 5V.
DE pin is connected attenuator of 10kohms(lowside) and 1khoms(highside) from external 5V.
i.e. DE pin voltage…
Part Number: SN65C1168E Other Parts Discussed in Thread: SN65C1167E , Hi Team,
Pins for 1A, 2A, 1B, and 2B are the noninverting and inverting input pins for receiver 1 and receiver 2. The 1Y, 2Y, 1Z, and 2Z are supposed to be the outputs for receiver 1…
You can try the spice model of SN65HVD1786
https://www.ti.com/lit/zip/SLLM343
or SN65C1167E
https://www.ti.com/lit/zip/SLLM344
or SN65C1168E
https://www.ti.com/lit/zip/SLLM347
All other devices come with IBIS model.
Neguse,
If you're looking for RS-485/422 line drivers, they all have 3-state output. For TI 4T (4 driver) devices, the minimum supply is 3.3V like AM26LV31E. For 2T/2R (2 driver and 2 receiver) devices, the minimum supply is all 5V like SN65C1167E and…