Answered

• SN65C1168E: Replacing the HD29051FP

  

  R.Fukunaga

  Resolved

  Part Number: SN65C1168E Other Parts Discussed in Thread: SN65C1168 , SN751178 , THVD1500 Tool/software: Hi all, To replace the HD29051FP used as the RS-422 driver/receiver We are considering using the SN65C1168E. We replaced the SN65C1168E in the…

  • Resolved

  • 1 month ago
  • Interface
  • Interface forum

• SN65C1168E: Output drive current

  

  dylan stuchbury

  TI Thinks Resolved

  Part Number: SN65C1168E Tool/software: The data sheet and application test circuits seems contradictory. For a typical application with 100Ohm termination, and typical output drive voltage Vod2 of 3.7V , then 37mA would be being sourced / sank. …

  • 8 months ago
  • Interface
  • Interface forum

• SN65C1168E-SEP: weight

  

  Adam Daluga

  TI Thinks Resolved

  Part Number: SN65C1168E-SEP Tool/software: Hi, What is the weight of the SN65C1168EMPWSEP? Thanks, Adam

  • 5 months ago
  • Interface
  • Interface forum
Answered

• SN65C1168E-SEP: Device response to short circuit conditions at input

  

  Colin Tombari

  Resolved

  Part Number: SN65C1168E-SEP Other Parts Discussed in Thread: THVD9491-SEP Tool/software: Hello, I am looking into the effects of a hard short from line to ground or line to line on the SN65C1168E-SEP receiver input. If a device that is sending data…

  • Resolved

  • 21 days ago
  • Interface
  • Interface forum
Answered

• SN65C1168E-SEP: SN65C1168EMPWSEP

  

  Ryan Truong

  Resolved

  Part Number: SN65C1168E-SEP Other Parts Discussed in Thread: THVD9491-SEP Tool/software: Supply voltage for the chip is -0.5 to 7V. But the recommended operating condition is from 4.5 to 5.5V. Is it ok if we use 3.3V supply for the chip? Is there any…

  • Resolved

  • 7 months ago
  • Interface
  • Interface forum

• SN65C1168E-SEP: SEU and SET characterization data

  

  Kara Haynes

  Part Number: SN65C1168E-SEP Tool/software: Hi there! Are there any additional reports we can provide for the SEU and SET characterization data of the SEE of SN65C1168EMPWTSEP ? Thanks! Kara

  • 4 months ago
  • Interface
  • Interface forum
Answered

• SN65C1168E-SEP: 3.3V supply instead of 5V operation

  

  Art Del Castillo1

  Resolved

  Part Number: SN65C1168E-SEP Other Parts Discussed in Thread: THVD9491-SEP Tool/software: To Whom it may concern: Can the SN65C1168EMPWSEP operate with a 3.3V supply instead of 5V? Thank you! Art

  • Resolved

  • 5 months ago
  • Interface
  • Interface forum

• SN65C1168E-SEP: Unsued pins: 2A, 2B, 2R.

  

  Ryan Truong

  TI Thinks Resolved

  Part Number: SN65C1168E-SEP Tool/software: PN: SN65C1168EMPWSEP. Can I connect pins 2A, 2B, and 2R to GND if the pins do not use?

  • 6 months ago
  • Interface
  • Interface forum
Answered

• SN65C1168E: Data sheet errors?

  

  Nick Nguyen

  Resolved

  Part Number: SN65C1168E Tool/software: Page 4, table 4-2 of the data sheet. It appears there are typo in the description of pin 11 and pin 13. From what I see, they should be "inverting". Please confirm.

  • Resolved

  • over 1 year ago
  • Interface
  • Interface forum
Answered

• SN65C1168E-SEP: Lack of steering diodes to power rails

  

  Aidan Phillips

  Resolved

  Part Number: SN65C1168E-SEP Other Parts Discussed in Thread: TPS7H2221-SEP Tool/software: Hello, There are a handful of parts that i have the same question for. These parts are: SN65C1168E-SEP TPS7H2221-SEP SN54SCT17-SEP SNJ55LVDS32FK …

  • Resolved

  • 6 months ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.