Part Number: SN65C1168E-SEP Other Parts Discussed in Thread: TPS7H2221-SEP Tool/software: Hello,
There are a handful of parts that i have the same question for. These parts are:
SN65C1168E-SEP
TPS7H2221-SEP
SN54SCT17-SEP
SNJ55LVDS32FK
All of these…
Part Number: SN65C1168E-SEP Other Parts Discussed in Thread: THVD9491-SEP Tool/software: Supply voltage for the chip is -0.5 to 7V. But the recommended operating condition is from 4.5 to 5.5V. Is it ok if we use 3.3V supply for the chip? Is there any…
Part Number: SN65C1168E Tool/software: The data sheet and application test circuits seems contradictory.
For a typical application with 100Ohm termination, and typical output drive voltage Vod2 of 3.7V , then 37mA would be being sourced / sank.
However…
Part Number: SN65C1168E Other Parts Discussed in Thread: SN65C1168 , Tool/software: Hi,
SN65C1168NS is EOL, and SN65C1168ENSR is suggested as a recommended replacement. Do you have any comparison data between SN65C1168NS and SN65C1168ENSR? We would like…
Part Number: SN65C1168E Tool/software: Page 4, table 4-2 of the data sheet. It appears there are typo in the description of pin 11 and pin 13. From what I see, they should be "inverting". Please confirm.
Part Number: SN65C1168E-SEP Hi,
So TI uses SPC to ensure quality of parts. How do we know that the reject rate for this part is acceptable in your SPC ? Please advise. Thank you.
Part Number: SN65C1168E-SEP Hello,
I would like to implement an RS422 interface SN65C1168E-SEP to convert a 0-3.3VDC square signal, to RS422 but my application needs a very good accuracy. Do you have any information about the jitter of this component…
Part Number: SN65C1168E-SEP Other Parts Discussed in Thread: ISOS141-SEP , Hello, I am trying to use the ISOS141-SEP in conjunction with the SN65C1168-SEP to create an RS-422 rated UART transceiver system. The main reason these parts were chosen was due…
