Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: SN65HVD08 Other Parts Discussed in Thread: THVD1429 Hi All
I have a question about the price of SN65HVD08.
THVD1429 is cheaper than SN65HVD08.
Why is the SN65HVD08 priced higher than the THVD1429?
Best Regards, Ishiwata
Part Number: SN65HVD08 Other Parts Discussed in Thread: THVD1420 Hi Team,
I understand from the E2E blog below that RS-485 transceivers with 3.3V and 5V supply comply with the RS-485 standard. Our customer's application needs long distance RS485 communication…
Part Number: SN65HVD08 Other Parts Discussed in Thread: SN65HVD78 , Dear TI,
I want to know about difference between SN65HVD08D and SN65HVD78DR.
Thank you
Best Regards,
Inho Jeon
Part Number: SN65HVD08 Hi,
I am trying to use the part SN65HVD08 connecting to a Modbus slave on one side and the other to the USB-UART cable https://www.digikey.ca/en/products/detail/ftdi-future-technology-devices-international-ltd/TTL-234X-5V/682371…
Part Number: SN65HVD08 PIN 5 and PIN 8 are found short-circuit, what are potential root causes? how can I veirify?
This chipset was used on a PDU(power distribution unit) with 220V input rated voltage.
Part Number: SN65HVD08 Other Parts Discussed in Thread: THVD1429 , THVD1450 , , STRIKE
Dear TI and all,
Above circuit is part of connecting audio device.
JK1, JK2 is RJ45 JACK(refer to attached a file PCB-832(RJ45 Jack).pdf .)
This jack is used to…
Part Number: SN65HVD08 Other Parts Discussed in Thread: THVD1550 Hi team, I have below questions about SN65HVD08 datasheet.
In datasheet p5 table 6.6, ten, driver enable time is 55 ns/6us. I cannot find figure 3 and figure 4. Please help share me what…
Other Parts Discussed in Thread: SN65HVD08 Hello,
I have a problem witch the SN65HVD08 when it is in open mode, the /RE is low. In datacheat p12 table2 output (pin1) is hight but in real it low.
This can appeared when we have 2 receiver in the line (line…
Other Parts Discussed in Thread: SN65HVD08 Hi Team
I will use TI SN65HVD08 x 2 in our system. but IC1 (HVD08) VCC = 3.3V and IC2 (HVD08) VCC =5V
Can normally communicate on different power supplies?