Part Number: SN65HVD1780 Other Parts Discussed in Thread: THVD2410 , THVD2450
Hello Team,
My customer needs confirmation about the device SN65HVD1780 in a 3.3V supply. They wanted to confirm if can the transceiver still have up to 320 nodes with only…
Part Number: SN65HVD1780 Hi,
In receiver mode, if pin A is left unconnected / floating, what's its voltage?
Although I don't see any reference in the datasheet that pin A has a specific voltage in this case, however, I measure it to be around 1…
Part Number: SN65HVD1780 Other Parts Discussed in Thread: SN65HVD72 Hi, team
just copy the inquiry from one of our customer, need your kindly help to answer it.
-------------------------------------------------------------------------------------…
Part Number: SN65HVD1780-Q1 Hi,
1. Device datasheet mentions short circuit current limit of +/-200mA, what is duration limit for short circuit protection?
2. Is there any recommendation for series resistor on bus?
Part Number: SN65HVD1780 Hi,
Could you please tell me the resistance value between A and Gnd pin? Also B and Gnd Pin. When i have measured the values it shows 5.6 Mega ohms and its works fine. But some ic having communication problem having 19kilo ohms…
Part Number: SN65HVD1780-Q1 Other Parts Discussed in Thread: SN65HVD1780 I am using SN65HVD1780 IC in 24V vehicle system. my query is, datasheet shows maximum voltage rating for A and B terminal of this ic is -70V to +70V. so is it safe if A and B signal…
Hi Umesh,
In the fault case of 16v on the B pin (with pull-down) while the device is driving B low (D and DE are high), the current through the driver is going to much more significant than the current through the pull-down (16v / 4.7k-ohm ~= 3mA),…
Part Number: SN65HVD1780-Q1 Hi, team,
I have some questions about SN65HVD1780-Q1 match design as below. Please look into it and give your suggestion.
1. Below is slave side transceiver design. For master side transceiver, do we need to design isometric…
Part Number: SN65HVD1780-Q1 Hi Eric,
Is it safe to do short to battery(24V) test on terminal A and B. As described in absolute maximum rating voltage range is -70V to +70V.
Please reply ASAP.
Thanks.
