Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.



Search tips
Showing 47 results View by: Thread Post Sort by

  • SN65HVD33: What is the difference?

    Answer Suggested
    Part Number: SN65HVD33 Tool/software: Hello, We are currently using the SN65HVD33 DRG4 . Unfortunately, this IC has been discontinued. I have found another one: SN65HVD33 DR . The electrical properties of these ICs are identical, but unfortunately I can…

  • SN65HVD33: Test issue for SN65HVD33

    Part Number: SN65HVD33 Hi, We use the SN65HVD33 for the RS232 interface, and end customer feedback to us there are more than 10pcs are damaged that the A/ B/ Z/ Y short circuit with GND, we want to know that how to test the below highlight V(TRANS) that…

  • SN65HVD33: SN65HVD33DR Full Fail Safe

    TI Thinks Resolved
    Part Number: SN65HVD33 Team, I want to check with you if SN65HVD33 can support full failsafe function? What is fullfail safe function: Without specific external circuit, when input is floating, the RX can keep logic high. I can see that we support failsafe…

  • SN65HVD33-EP: Transient energy into the A/B inputs

    Answer Suggested
    Part Number: SN65HVD33-EP To whom it may concern - The absolute max rating for the bus terminal (A, B, Y, Z) cannot exceed -9 and 14V. Is this spec'd based off of DC or AC voltage? Per Figure 26 from the data sheet, it looks like that there are internal…

  • SN65HVD33: PAD PIN QUIESTION

    TI Thinks Resolved
    Part Number: SN65HVD33 Hello to TI support team , I am using SN65HVD33RHL VQFN , I would like to know your recommendation for thermal pad pin #21 , is it should be connected to GND or disconnected to any net ? B.R Alexander Burtakov

  • SN65HVD33: inquire of the storage temperature

    TI Thinks Resolved
    Part Number: SN65HVD33 Hi! I want to inquire about the storage temperature of this part. I've found that there's maximum temperature but no minimum.

  • SN65HVD33: overshoot and undershoot requirement for driver input Pin5

    TI Thinks Resolved
    Part Number: SN65HVD33 Hi Expert, my customer is using SN65HVD33DR SOIC-14, for Pin 5, Digital input, the input signal will have overshoot and undershoot, the max and min will be 4.05V and -1.10V. our absolute electric parameter in the datasheet is …
    • Answered

  • THVD1452: THVD1452 can be replaced with SN65HVD33/SN75LBC180/THVD1552

    Resolved
    Part Number: THVD1452 Other Parts Discussed in Thread: SN65HVD33 , SN75LBC180 , THVD1552 Hi team, Customer considers to replace each RS485 device below with THVD1452, because THVD1452 can support 3.3V/5V. In general, are ther any concerns? SN65HVD33 with…
    • Resolved
    • Answered

  • SN65HVD33: Current limit

    Resolved
    Part Number: SN65HVD33 Hi, Will the device output (Y and Z pin) be 0V when the output current exceeds 250mA (Current limit)? Or will it be High-Z? Best Regards, Nishie
    • Resolved
    • Answered

  • ISO1432: Combination of SN65HVD33 and SN65HVD1792

    Resolved
    Part Number: ISO1432 Other Parts Discussed in Thread: SN65HVD33 , SN65HVD1792 , THVD1452 Hello Now I am designing RS-485 interface circuit using ISO1432. The following transceiver ICs will be used for the components to be communicated with. - Transceiver…
    • Resolved

Didn't find what you are looking for? Post a new question.