• SN65HVD33: inquire of the storage temperature

  

  Klaus Shih

  TI Thinks Resolved

  Part Number: SN65HVD33 Hi! I want to inquire about the storage temperature of this part. I've found that there's maximum temperature but no minimum.

  • over 3 years ago
  • Interface
  • Interface forum

• SN65HVD33: overshoot and undershoot requirement for driver input Pin5

  

  Chi Zhang2

  TI Thinks Resolved

  Part Number: SN65HVD33 Hi Expert, my customer is using SN65HVD33DR SOIC-14, for Pin 5, Digital input, the input signal will have overshoot and undershoot, the max and min will be 4.05V and -1.10V. our absolute electric parameter in the datasheet is…

  • over 3 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD33: Current limit

  

  Yuta Nishie

  Resolved

  Part Number: SN65HVD33 Hi, Will the device output (Y and Z pin) be 0V when the output current exceeds 250mA (Current limit)? Or will it be High-Z? Best Regards, Nishie

  • Resolved

  • over 4 years ago
  • Interface
  • Interface forum

• SN65HVD33-EP: Transient energy into the A/B inputs

  

  Brendan Toy

  Answer Suggested

  Part Number: SN65HVD33-EP To whom it may concern - The absolute max rating for the bus terminal (A, B, Y, Z) cannot exceed -9 and 14V. Is this spec'd based off of DC or AC voltage? Per Figure 26 from the data sheet, it looks like that there are internal…

  • over 3 years ago
  • Interface
  • Interface forum
Answered

• THVD1452: THVD1452 can be replaced with SN65HVD33/SN75LBC180/THVD1552

  

  Noriyuki Takahashi

  Resolved

  Part Number: THVD1452 Other Parts Discussed in Thread: SN65HVD33 , SN75LBC180 , THVD1552 Hi team, Customer considers to replace each RS485 device below with THVD1452, because THVD1452 can support 3.3V/5V. In general, are ther any concerns? SN65HVD33…

  • Resolved

  • over 3 years ago
  • Interface
  • Interface forum
Answered

• ISO1432: Combination of SN65HVD33 and SN65HVD1792

  

  MESH

  Resolved

  Part Number: ISO1432 Other Parts Discussed in Thread: SN65HVD33 , SN65HVD1792 , THVD1452 Hello Now I am designing RS-485 interface circuit using ISO1432. The following transceiver ICs will be used for the components to be communicated with. - Transceiver…

  • Resolved

  • over 5 years ago
  • Isolation
  • Isolation forum
Answered

• SN65HVD33: Differential Impedance

  

  high speed guy

  Resolved

  Part Number: SN65HVD33 Hi, If using the chip as a RS422 driver would it be correct to assume that the differential impedance of the trace (A,B,Y,Z) to be 100 ohms? Thank you, HSG

  • Resolved

  • over 6 years ago
  • Interface
  • Interface forum

• SN65HVD33: Replacement for SN65HVD33D

  

  Lauren Mayfield

  TI Thinks Resolved

  Part Number: SN65HVD33 Other Parts Discussed in Thread: STRIKE , THVD1500 , SN75HVD3082E , SN75LBC184 , THVD1419 , SN65HVD1470 , SN65HVD70 Hi team, Question from a customer- Several years ago we designed a new processor board with a touchscreen…

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD33: half-duplex mode of SN65HVD33

  

  Lilian Chang

  Resolved

  Part Number: SN65HVD33 Hi Team, If the SN65HVD33 can work at half duplex mode， which means only use one pair differential cable? if Yes, could you please help to design suggestion of how RS422 full duplex switch to RS485 half duplex work mode? Thank…

  • Resolved

  • over 8 years ago
  • Interface
  • Interface forum

• SN55110A: Is it compatible with SN65HVD33?

  

  Cedrick

  Part Number: SN55110A Other Parts Discussed in Thread: SN65HVD33 Hi, Good day. I hope you are doing well. Our customer wants to know if the SN55110A is compatible with the SN65HVD33? I understand the 110A is suggested to be paired with the 107A. However…

  • over 5 years ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.