Part Number: SN65HVD485E Tool/software: I would like to inquire about the label show d/c 2309 , the lower left is 33, but the tape reel is sorted 33 and 34 not in order, and laser marks vary in thickness, is this normal?
Part Number: SN65HVD485E Other Parts Discussed in Thread: THVD1420 , THVD1520 Can you suggest PCB guide lines SN65HVD485E.,
PCB track is straight required or not,
refer attached PCB layout it is OK or not.
PTC us for little fuse part
Kindly…
Part Number: SN65HVD485E Hello, I believe there is an error in figure 9-6 in the datasheet for this part. The figure shows the DE and !RE pins being connected to D and R respectively through resistors, with vias indicating that D and R are directly tied…
Part Number: SN65HVD485E Hi Team,
I am using SN65HVD485E in my circuit design. I was doing it breadboard testing and facing one issue with IC.
Even If I don't connect 5V to pin 8(Power pin), but provided 5V to Tx enable(Pin 3) is provided and when…
Part Number: SN65HVD485E Other Parts Discussed in Thread: ISO3082 , ISO1432 , ISO6741 , ISO7741 , ISO6721 , ISO7721 Hi,
I am working on an RS-485 interface design. I am looking for a digital isolator that is compatible with the Tx and Rx pins of the…
Part Number: SN65HVD485E Hi
The fail safe of the SN65HVD485E may not work on our customer's system.
There is no external bias resistor for fail safe. The customer's process inspection is as follows.
Failure is caused by sending an unintended Start…
Part Number: SN65HVD485E Hi,
I have a faulty component which is written on it : VP485 58M AC85.
What is the TI part number for this component?
I'm looking for a more ESD-resistant component, with the same foot print, can you refer me to this part…
Part Number: SN65HVD485E Hi team,
We want to apply SN65HVD485EDRG4 to replace LTC1487, but we can't receive data when testing. Could you review the schematic and provide the suggestions? Thanks!
Best regards,
Sam Ting
Part Number: SN65HVD485E Other Parts Discussed in Thread: SN75LBC176A Team,
Posting on behalf of my customer.
"We replaced the TI DS3696N with a SN65HDV485EP but I believe the Fail Safe for the RX Output high when RX Input open circuit is causing…
Hi Kurt,
The three characters on the second line are (in order) the last digit of the year of assembly, the month of assembly (with 1 = January, 2 = February, ..., A = October, B = November, etc.), and the assembly site (of which this device has several…
