• SN65HVD70: Differential signal line characteristic impedance

  

  AP

  TI Thinks Resolved

  Part Number: SN65HVD70 Tool/software: Hello Team, We are using SN65HVD70D in our application. Can you provide the characteristic impedance for RS422 differential signal lines? Thank You.

  • over 1 year ago
  • Interface
  • Interface forum

• SN65HVD70: Schematic Review

  

  sonali zodage

  TI Thinks Resolved

  Part Number: SN65HVD70 Hello TI Team, We are using the following TI components for our application. TPS27081ADDCR, TPS3808G18DBVT, SN65HVD70D Can you please review the schematic for these ICs? Please find the attached schematic…

  • over 2 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD70: Kindly advise on Termination Resistor required or not?

  

  Naveen K1

  Resolved

  Part Number: SN65HVD70 Other Parts Discussed in Thread: SN65HVD73 , THVD1410 Hi, We are using RS485 SN65HVD70, My doubt is, when the Termination resistor(Rt) and Bias resistor's are mandatory or optional ? We read document TIA/EIA-485 (RS-485),…

  • Resolved

  • over 4 years ago
  • Interface
  • Interface forum

• SN65HVD70: the power consumption of RS485

  

  suyi suyi

  TI Thinks Resolved

  Part Number: SN65HVD70 The terminal device is a slaver with SN65HVD7x,and the device runs at the status of low consumption of power,so that it can not support the IO "output current ,driver and receiver" mentioned in datasheet of SN65HVD7x。 1:as the…

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD70: Available Package

  

  david armistead

  Resolved

  Part Number: SN65HVD70 The data sheet shows it being available in the MSOP-10 3x3 mm package. I found it in the 10VSSOP which is 3x5 mm with the pin to pin length.

  • Resolved

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD70: Datasheet discrepancy

  

  Jejomar Ildefonso

  Resolved

  Part Number: SN65HVD70 Other Parts Discussed in Thread: SN65HVD76 , Hi Team, One of our customers have noticed a minor discrepancy within the SN65HVD7x datasheet. Pages 4 and 5 of the datasheet provides the pin configuration for apparently the SN65HVD147x…

  • Resolved

  • over 6 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD70: The level of input

  

  Liu Yang

  Resolved

  Part Number: SN65HVD70 Hi Team, Please help me answer the follow question, thank you so much. SN65HVD70 IC is used in RS485 secification. The input A and the output Y are connected. When the DE is set to "L" then the output is high impedance,…

  • Resolved

  • over 6 years ago
  • Interface
  • Interface forum

• RE: SN65HVD70: How to connect with AM335x UART

  

  Masashi Ohhashi

  Hao-san, Thank you for your reply. I will check the document and thread. Best Regards, M.Ohhashi

  • over 6 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD70: SN65HVD70 as full duplex RS485 interface, battery powered

  

  MI

  Resolved

  Part Number: SN65HVD70 Other Parts Discussed in Thread: SN65HVD37 I have a battery powered application in which need to give full duplex RS485. 1. System should be low power as battery powered 2. 3.3V vdd supply 3. Full duplex RS485 4. Length…

  • Resolved

  • over 8 years ago
  • Interface
  • Interface forum

• SN65HVD71:How to configure a RS485 Full-duplex transceiver as Half-duplex?

  

  ilker TUNA

  TI Thinks Resolved

  Part Number: SN65HVD71 Other Parts Discussed in Thread: SN65HVD72 , SN65HVD70 Tool/software: Hi, I have designed a Full Duplex system using the SN65HVD71 transceiver. I would also like to use it in Half Duplex mode. Could you please advise me on the…

  • 9 months ago
  • Interface
  • Interface forum

Didn't find what you are looking for? Post a new question.